Miata Turbo Forum - Boost cars, acquire cats.
Share Your Pictures with Our Community. Upload Now
0 2012/05/16 17:46:46
0 2012/05/16 17:46:46
0 2012/05/16 17:46:24
0 2012/05/16 17:46:24
0 2012/05/16 17:46:24
0 2012/05/16 17:46:02
0 2012/05/16 17:46:02
0 2012/05/16 17:46:02
0 2012/05/16 17:45:35
0 2012/05/16 17:45:35
0 2012/05/16 17:45:35
photo(11)
photo(11)
0 2012/05/11 19:36:00
Advertisement
photo(10)
photo(10)
0 2012/05/11 19:36:00
photo(9)
photo(9)
0 2012/05/11 19:33:40
borgwarner efr 6258 turbo
borgwarner efr 6258 turbo
0 2012/05/10 10:10:31
GTX2867R
GTX2867R
0 2012/05/10 10:10:31
MSM exhaust 1
MSM exhaust 1
0 2012/05/06 11:41:26
intake
intake
0 2012/05/06 11:40:57
MAF relocation kit
MAF relocation kit
0 2012/05/06 11:40:57
throttle body
throttle body
0 2012/05/06 11:40:57
IMAG0307
IMAG0307
0 2012/05/03 07:14:59
IMAG0308
IMAG0308
0 2012/05/03 07:14:59
IMAG0089
IMAG0089
0 2012/05/03 06:40:31
IMAG0086
IMAG0086
0 2012/05/03 06:40:31
IMAG0069
IMAG0069
0 2012/05/03 06:40:31
Side view, relatively clean
Side view, relatively clean
0 2012/05/02 16:47:00
Touge Run Front Lip
Touge Run Front Lip
0 2012/05/02 16:47:00
018 an e-bay rx7 oil cooler. Will need to source out a couple of 16mm x 1.5 straight thread -8 90 degree adapters to make this work. Still I may have to tip the radiator back some; or merely run the lines out the front side. Still a work in progress.
018 an e-bay rx7 oil cooler. Will need to source out a couple of 16mm x 1.5 straight thread -8 90 degree adapters to make this work. Still I may have to tip the radiator back some; or merely run the lines out the front side. Still a work in progress.
0 2012/04/30 09:23:14
031 Everything fits!
031 Everything fits!
0 2012/04/30 09:23:14
022 Oil cooler from the front. Also working on a front mounted intake; using the frame rail as the duct. First a trial for fittment, as the bumper cover is a close fit. Then I'll gut and gusset the frame tube.
022 Oil cooler from the front. Also working on a front mounted intake; using the frame rail as the duct. First a trial for fittment, as the bumper cover is a close fit. Then I'll gut and gusset the frame tube.
0 2012/04/30 09:23:14
Supercharger Installed
Supercharger Installed
1 2012/04/29 18:10:09
Piston #4
Piston #4
0 2012/04/29 18:10:09
Advertisement