Miata Turbo Forum - Boost cars, acquire cats.
Share Your Pictures with Our Community. Upload Now
TURBO MIATA 006
TURBO MIATA 006
0 2008/10/15 06:55:38
TURBO MIATA 007
TURBO MIATA 007
0 2008/10/15 06:55:38
TURBO MIATA 001
TURBO MIATA 001
0 2008/10/15 06:54:11
TURBO MIATA 002
TURBO MIATA 002
0 2008/10/15 06:54:11
TURBO MIATA 003
TURBO MIATA 003
0 2008/10/15 06:54:11
DCP 0006
DCP 0006
0 2008/10/12 13:36:25
DCP 0003
DCP 0003
0 2008/10/12 13:36:25
EK
EK
0 2008/10/12 13:36:25
agcar[1]
agcar[1]
0 2008/10/12 13:25:26
DSC01875
DSC01875
0 2008/10/10 05:56:09
Made own Carbon fiber parts. Its easy you should too.
Made own Carbon fiber parts. Its easy you should too.
0 2008/10/10 05:56:09
DSC01909
DSC01909
0 2008/10/10 05:56:09
Advertisement
408windsor samurai. Runs 9.90's in the quarter mile
408windsor samurai. Runs 9.90's in the quarter mile
0 2008/10/10 05:53:15
Designed my own frame
Designed my own frame
0 2008/10/10 05:53:15
Radiator had to go in the rear of car.
Radiator had to go in the rear of car.
0 2008/10/10 05:53:15
1/2 of the Turbo V12 intake I was tigging
1/2 of the Turbo V12 intake I was tigging
0 2008/10/10 05:46:08
Lower - Original Jag V12 Rod , weighs 998 grams length 5.990. TOP- Ford 351w H beam rods, weighs 665 grams length 6.125 net result = Stronger Rod, lighter weight, better rod ratio
Lower - Original Jag V12 Rod , weighs 998 grams length 5.990. TOP- Ford 351w H beam rods, weighs 665 grams length 6.125 net result = Stronger Rod, lighter weight, better rod ratio
0 2008/10/10 05:46:08
V12 turbo intake, ended up taking to long to build, scraped project and bought 6 webers
V12 turbo intake, ended up taking to long to build, scraped project and bought 6 webers
0 2008/10/10 05:46:08
Porting V12 heads, intake runners
Porting V12 heads, intake runners
0 2008/10/10 05:38:43
Getting ready for heads
Getting ready for heads
0 2008/10/10 05:38:43
V12 build finished. 13.5:1 compression, custom designed cams, Ford H-beam rods, BRC pistons, Honda CRX rings. Custom made timing chain assembly. Ported heads. Pistons and rods are 14 pounds lighter than original.
V12 build finished. 13.5:1 compression, custom designed cams, Ford H-beam rods, BRC pistons, Honda CRX rings. Custom made timing chain assembly. Ported heads. Pistons and rods are 14 pounds lighter than original.
0 2008/10/10 05:38:43
Hammond Case Side
Hammond Case Side
0 2008/10/01 21:37:35
Hammond Case open
Hammond Case open
0 2008/10/01 21:34:26
Hammond Case closed
Hammond Case closed
0 2008/10/01 21:34:26
Angled Shot of Top
Angled Shot of Top
0 2008/09/29 23:13:37
Bottom
Bottom
0 2008/09/29 23:06:27
Top
Top
0 2008/09/29 23:06:27
avatar 4850
avatar 4850
0 2008/09/21 10:45:42
FRONT
FRONT
0 2008/09/19 05:18:09
INTER
INTER
0 2008/09/19 05:17:11
LHS
LHS
0 2008/09/19 05:17:11
Rear Quarter View
Rear Quarter View
0 2008/09/07 12:09:27
Advertisement