Miata Turbo Forum - Boost cars, acquire cats.
0 2023/07/18 12:46:34
0 2023/07/18 12:50:21
0 2023/08/15 18:57:31
Put out the cable housing from the crimp.
Put out the cable housing from the crimp.
0 2023/08/15 18:57:42
0 2023/08/15 18:57:46
Before I cut the cable, solder it at the cut so it won't fray.
Before I cut the cable, solder it at the cut so it won't fray.
0 2023/08/15 18:57:50
0 2023/08/15 18:57:54
Had to be creative to open up the crimp a little.
Had to be creative to open up the crimp a little.
0 2023/08/15 18:57:59
19 inches
19 inches
0 2023/08/15 18:58:04
0 2023/08/15 18:58:08
0 2023/08/15 18:58:12
Heavy duty heat shrink to make sure it stays together. This shrink bonds when it shrinks.
Heavy duty heat shrink to make sure it stays together. This shrink bonds when it shrinks.
0 2023/08/15 18:58:16
0 2023/08/15 18:58:20
This is a 1/4" bolt that I rounded and drilled through.
This is a 1/4" bolt that I rounded and drilled through.
0 2023/08/15 18:58:24
Temporary way to mark the perfect spot to attached the "thing". There is someone out there that makes a set screw version of this.
Temporary way to mark the perfect spot to attached the "thing". There is someone out there that makes a set screw version of this.
0 2023/08/15 18:58:27
Soldered and crimped
Soldered and crimped
0 2023/08/15 18:58:32
The heat shrink wasn't my idea and this isn't my engine. Mine isn't this clean.
The heat shrink wasn't my idea and this isn't my engine. Mine isn't this clean.
0 2023/08/15 18:58:35
There are four little tabs that keep the metal part together.
There are four little tabs that keep the metal part together.
0 2023/08/15 19:12:27
You have to drill the back side of the two holes that crimp the metal parts together
You have to drill the back side of the two holes that crimp the metal parts together
0 2023/08/15 19:12:32
Just going to pop it open
Just going to pop it open
0 2023/12/20 17:23:18
Yep, it's open
Yep, it's open
0 2023/12/20 17:24:26
Square tube, long bolts, parts of a bearing puller
Square tube, long bolts, parts of a bearing puller
0 2023/12/20 17:35:06
This kills the seal
This kills the seal
0 2023/12/20 17:40:01
0 2023/12/20 17:41:14
0 2023/12/20 17:41:23
0 2023/12/20 17:41:26
0 2023/12/20 17:41:43
0 2023/12/22 18:50:03
0 2023/12/22 18:50:11
0 2023/12/22 18:54:15
0 2023/12/22 18:55:51
0 2023/12/22 18:55:55
0 2023/12/22 18:55:59
0 2023/12/23 15:43:06
Don't forget to put on the input shaft before everything is pressed together.
Don't forget to put on the input shaft before everything is pressed together.
0 2023/12/26 20:03:36
0 2023/12/26 20:03:39
0 2023/12/26 20:03:41
The detent needed to come out or the shift arm won't go in.
The detent needed to come out or the shift arm won't go in.
0 2023/12/26 20:03:43
Trying to keep things in place with string
Trying to keep things in place with string
0 2023/12/26 20:03:44
0 2023/12/26 20:03:46