Miata Turbo Forum - Boost cars, acquire cats.
0 2015/06/03 14:45:45
0 2015/06/03 14:46:11
0 2015/06/03 14:46:20
0 2015/06/03 14:46:28
0 2015/06/03 14:47:33
0 2015/06/03 14:47:45
0 2015/06/03 14:47:55
0 2015/06/23 11:31:06
0 2015/09/07 14:59:30
0 2015/09/07 14:59:47
0 2015/09/07 14:59:55
0 2015/09/07 15:00:20
0 2015/10/19 17:08:30
0 2015/10/21 10:04:34
0 2015/10/21 10:59:09
It's a seat! (NA seatbelt receiver not necessarily included)
It's a seat! (NA seatbelt receiver not necessarily included)
0 2015/10/21 22:15:31
Certified until 2020. Woot!
Certified until 2020. Woot!
0 2015/10/21 22:16:01
Bracketron. From the good folks at PCI. Model number: SM-90MX5-S52R - 89-05 Mazda MX-5 For Sparco Sprint 5 (RIGHT) setback 1.6"
Bracketron. From the good folks at PCI. Model number: SM-90MX5-S52R - 89-05 Mazda MX-5 For Sparco Sprint 5 (RIGHT) setback 1.6"
0 2015/10/21 22:16:18
I cut that so you don't have to. Reduces BFHing.
I cut that so you don't have to. Reduces BFHing.
0 2015/10/21 22:16:40
I filed away that corner a tad for a slightly better fit.
I filed away that corner a tad for a slightly better fit.
0 2015/10/21 22:16:49
0 2015/10/31 09:54:16
0 2015/10/31 09:56:59
0 2015/10/31 09:59:48
0 2015/10/31 10:08:20
0 2015/10/31 10:08:32
0 2015/10/31 15:39:36
0 2015/11/01 21:28:36
0 2015/11/02 19:43:19
0 2015/11/06 14:00:34
0 2015/11/06 15:36:47
0 2015/11/08 18:19:55
0 2015/11/08 18:21:05
0 2015/12/07 20:19:42
0 2015/12/12 14:18:41
Turbo goes on that end. Coming soon! For now I removed the last piece, threw a shorter one on and slapped a cone filter on the end of it.
Turbo goes on that end. Coming soon! For now I removed the last piece, threw a shorter one on and slapped a cone filter on the end of it.
0 2015/12/13 19:46:22
Through the hole behind the headlight, which I enlarged and trimmed with plastic.
Through the hole behind the headlight, which I enlarged and trimmed with plastic.
0 2015/12/13 19:46:35
Intercooler goes there.
Intercooler goes there.
0 2015/12/13 19:46:58
I went around the side of the radiator and under the sway bar.
I went around the side of the radiator and under the sway bar.
0 2015/12/13 19:47:13
up and in.
up and in.
0 2015/12/13 19:47:23
Used some angle stock aluminum for a bracket, with cutaways so it could sit as low as possible.
Used some angle stock aluminum for a bracket, with cutaways so it could sit as low as possible.
0 2015/12/13 19:47:42