Miata Turbo Forum - Boost cars, acquire cats.
0 2016/01/03 14:15:26
0 2016/01/03 14:15:32
0 2016/01/03 14:15:38
0 2016/01/06 14:45:02
0 2016/01/14 16:15:03
1in socket to connect the reroute hose to the lower one and no leaks.
1in socket to connect the reroute hose to the lower one and no leaks.
0 2016/01/14 20:27:07
Looped spare hose
Looped spare hose
0 2016/01/15 20:06:10
1in socket between the reroute hose and lower FM hose.
1in socket between the reroute hose and lower FM hose.
0 2016/01/15 20:07:01
Light fan on there. Figure I'll keep an eye on engine temps as the weather warms and I see more traffic.
Light fan on there. Figure I'll keep an eye on engine temps as the weather warms and I see more traffic.
0 2016/01/15 20:14:02
Smaller fan is 3lb 6.8oz
Smaller fan is 3lb 6.8oz
0 2016/01/15 20:14:41
Big fan is 4lb 12.8oz
Big fan is 4lb 12.8oz
0 2016/01/15 20:14:55
This rat nest is the factory LS harness.
This rat nest is the factory LS harness.
0 2016/06/09 20:25:29
Mocking up the new harness.
Mocking up the new harness.
0 2016/06/09 20:25:56
The GM splice is just some wire wrapped around and shrink wrap.
The GM splice is just some wire wrapped around and shrink wrap.
0 2016/06/09 20:26:02
DIY bore snake with a USB snake cam. JUST fits in the whole. Image is sorta crap, but iif you play with the crappy snake is sorta works. A better USB cam would have done better. I all seems in order inside. Little bit of build up at the side though. I'll try again soon.
DIY bore snake with a USB snake cam. JUST fits in the whole. Image is sorta crap, but iif you play with the crappy snake is sorta works. A better USB cam would have done better. I all seems in order inside. Little bit of build up at the side though. I'll try again soon.
0 2016/06/09 20:27:03
Try 3 of the LS coil brackets. This on is solid and I could probably stand on it. Aluminum for the win. I like this much better than the sheet aluminum thing from before. I want to do a pretty 3D printed on sometime once I get better at CAD.
Try 3 of the LS coil brackets. This on is solid and I could probably stand on it. Aluminum for the win. I like this much better than the sheet aluminum thing from before. I want to do a pretty 3D printed on sometime once I get better at CAD.
0 2016/06/09 20:30:53
0 2016/06/09 20:32:53
Safety inspection.
Safety inspection.
0 2016/06/09 21:55:06
Rewired the ribbon cable for the power and volume to a 4 pin stereo connector. Now it goes to the hard buttons.
Rewired the ribbon cable for the power and volume to a 4 pin stereo connector. Now it goes to the hard buttons.
0 2016/06/09 21:55:37
The mentioned hard buttons. LED halo is wired to the headlights and dimmer. The stereo male plug is the DetCan wire from the engine bay to laptop. Prev-owner had a notch there for a turbo timer and repurposed it for this. I want to put a female jack in and make it more permanent and clean. Also new center console would be nice.
The mentioned hard buttons. LED halo is wired to the headlights and dimmer. The stereo male plug is the DetCan wire from the engine bay to laptop. Prev-owner had a notch there for a turbo timer and repurposed it for this. I want to put a female jack in and make it more permanent and clean. Also new center console would be nice.
0 2016/06/09 21:56:21
So far it woks mostly. Little hiccups with the kernal. I am a total root noob. First try was suck.
So far it woks mostly. Little hiccups with the kernal. I am a total root noob. First try was suck.
0 2016/06/09 21:59:04
Final-ish coil wired up. I want to use something cleaner than a weatherpack
Final-ish coil wired up. I want to use something cleaner than a weatherpack
0 2016/06/09 22:00:18
0 2016/06/16 13:43:08
0 2016/06/16 13:43:12
0 2016/06/16 13:43:17
0 2016/06/16 14:20:12
EDIT: also these came in. Fingures crossed they will fit on 15x8 et25 and no roll. should have camber in the 1.7-1.8deg I think. Can't find my notes
EDIT: also these came in. Fingures crossed they will fit on 15x8 et25 and no roll. should have camber in the 1.7-1.8deg I think. Can't find my notes
0 2016/06/16 14:22:09
0 2016/06/27 11:02:09
0 2016/06/27 11:06:04
0 2016/08/12 07:23:47
0 2016/10/17 10:26:42
Not totally sure this was from an NB, or shoot a pic of the din mount in the car you have.
Not totally sure this was from an NB, or shoot a pic of the din mount in the car you have.
0 2016/10/17 10:27:01
0 2016/10/17 10:28:00
0 2016/10/17 10:30:22
0 2016/10/17 10:30:49
0 2016/10/17 17:42:56
0 2016/10/19 09:25:16
0 2016/10/19 09:26:55
0 2016/10/19 09:30:35
0 2016/10/27 16:05:54