Miata Turbo Forum - Boost cars, acquire cats.
Replaced the moulding that goes around the inside of the window. It had two cracks in two different pieces. They bothered me for a long time. Is good to get some of these little ocd things fixed finally.
Replaced the moulding that goes around the inside of the window. It had two cracks in two different pieces. They bothered me for a long time. Is good to get some of these little ocd things fixed finally.
0 2015/09/04 20:04:42
Fixed the passenger side door handle. The end had been snapped off. Put some sound deadening in the doors. Speakers are 6 1/2 inch kickers they go well. Probably would go better with an amp.
Fixed the passenger side door handle. The end had been snapped off. Put some sound deadening in the doors. Speakers are 6 1/2 inch kickers they go well. Probably would go better with an amp.
0 2015/09/04 20:02:01
got the bonnet catch cleaned up a bit and lubed the release cable. Intercooler cleaned and reinstalled. This intercooler seems to work well its some knock off brand but is reasonable quality,
got the bonnet catch cleaned up a bit and lubed the release cable. Intercooler cleaned and reinstalled. This intercooler seems to work well its some knock off brand but is reasonable quality,
0 2015/08/26 04:07:08
Have actually sorted most of the wiring on this side too not that it looks like it. Lights are back in
Have actually sorted most of the wiring on this side too not that it looks like it. Lights are back in
0 2015/08/26 04:06:58
Passenger side wiring is done. Have decided not to run the o2 sensor so close to the turbo this time. Not that I had any issues with it 150mm from the turbine on the old setup
Passenger side wiring is done. Have decided not to run the o2 sensor so close to the turbo this time. Not that I had any issues with it 150mm from the turbine on the old setup
0 2015/08/26 04:06:52
More undersealing to do this weekend will carry on under the car.
More undersealing to do this weekend will carry on under the car.
0 2015/08/26 04:06:46
Will change the outlet on the turbo to straight down
Will change the outlet on the turbo to straight down
0 2015/08/18 03:33:28
323 Valve cover
323 Valve cover
0 2015/08/18 03:33:21
Steering rack cleaned up
Steering rack cleaned up
0 2015/08/13 02:54:55
Ground out all the old underseal and coated the front wheel wells very happy with the result
Ground out all the old underseal and coated the front wheel wells very happy with the result
0 2015/08/13 02:54:49
0 2015/08/13 02:52:32
0 2015/08/13 02:52:27
0 2015/08/13 02:52:22
Seems a real shame to cover the new timing belt
Seems a real shame to cover the new timing belt
0 2015/08/13 02:44:29
New rocker gasket and started bolting the manifold on...
New rocker gasket and started bolting the manifold on...
0 2015/08/13 02:44:23
The quality of these studs is great and the lube it comes with is amazing too.
The quality of these studs is great and the lube it comes with is amazing too.
0 2015/08/13 02:44:15
Head Torqued to 60 ft lbs will check again after first drive
Head Torqued to 60 ft lbs will check again after first drive
0 2015/08/13 02:44:09
subtle green clutch line matches my tiens lol
subtle green clutch line matches my tiens lol
0 2015/08/06 03:56:08
Engine and front sub frame installed
Engine and front sub frame installed
0 2015/08/06 03:55:56
ARP Head studs installed
ARP Head studs installed
0 2015/08/06 03:55:42
Got my new old dash
Got my new old dash
0 2015/08/06 03:55:27
Starting to look like a car again
Starting to look like a car again
0 2015/08/06 03:54:57
New wheels
New wheels
0 2015/07/28 01:36:30
Oil pump and water pump installed
Oil pump and water pump installed
0 2015/07/28 01:36:22
Rear sub-frame installed
Rear sub-frame installed
0 2015/07/28 01:36:13
Starting to get some floor space back
Starting to get some floor space back
0 2015/07/28 01:36:07
0 2015/07/28 01:35:54
My certification plate for modifications. Sorry for crappy pic. In New Zealand you have to get your car certified for changing almost anything on your car. Adjustable suspension wheels even... its not the best system. About 10-15 years ago you could do almost anything to your car as long as it passed its warrant of fitness (WOF) now you can't change your car if it doesnt match the cert plate. Even reverting it back to stock.
My certification plate for modifications. Sorry for crappy pic. In New Zealand you have to get your car certified for changing almost anything on your car. Adjustable suspension wheels even... its not the best system. About 10-15 years ago you could do almost anything to your car as long as it passed its warrant of fitness (WOF) now you can't change your car if it doesnt match the cert plate. Even reverting it back to stock.
0 2015/07/22 03:13:20
Decided to stick with the na dash. Getting the new uncracked one soon. Still have to paint the steering column and dash frame.
Decided to stick with the na dash. Getting the new uncracked one soon. Still have to paint the steering column and dash frame.
0 2015/07/22 03:09:40
Diff bushings installed
Diff bushings installed
0 2015/07/22 03:03:16
Yay I'm starting to get somewhere with this project
Yay I'm starting to get somewhere with this project
0 2015/07/22 03:03:07
Removing the rubber bushings from the sway bar end links was the worst part of the poly install
Removing the rubber bushings from the sway bar end links was the worst part of the poly install
0 2015/07/22 03:02:42
The state of my garage at the moment. Seriously need to clean up
The state of my garage at the moment. Seriously need to clean up
0 2015/07/22 03:02:24
Before on the left cleaned on the right. Didn't pull them apart to re grease them because I did it when I installed the torsen.
Before on the left cleaned on the right. Didn't pull them apart to re grease them because I did it when I installed the torsen.
0 2015/07/22 03:02:14
0 2015/07/22 03:02:03
My lovely girlfriend started on my door panels
My lovely girlfriend started on my door panels
0 2015/07/13 03:26:42
Clean enough for the couch...
Clean enough for the couch...
0 2015/07/13 03:26:30
Bushings and zerks fitted
Bushings and zerks fitted
0 2015/07/13 03:26:20
Cleaned these panels up with wire wheel on my grinder and a couple of coats of zinc paint
Cleaned these panels up with wire wheel on my grinder and a couple of coats of zinc paint
0 2015/07/11 18:43:47
Under sides of panels
Under sides of panels
0 2015/07/11 18:42:44