Miata Turbo Forum - Boost cars, acquire cats.
I heard that this is the last year that Audi/Lamborghini will be using V10s in their GT3 cars.
I heard that this is the last year that Audi/Lamborghini will be using V10s in their GT3 cars.
0 2026/03/30 08:59:25
The Carousel almost claims another victim.
The Carousel almost claims another victim.
0 2026/03/30 08:59:28
0 2026/03/30 08:59:31
0 2026/03/30 09:07:01
Reference picture.
Reference picture.
0 2026/03/30 19:53:36
Side shot, reference picture two.
Side shot, reference picture two.
0 2026/03/30 19:54:16
Current oil drain flange, ~5” to a barb AN10 fitting
Current oil drain flange, ~5” to a barb AN10 fitting
0 2026/03/30 19:54:47
The tip of the barb almost rests on that one power steering line, so the hose has to go between the coolant hose & power steering line.
The tip of the barb almost rests on that one power steering line, so the hose has to go between the coolant hose & power steering line.
0 2026/03/30 19:54:54
Roughly the area where NPT fitting will go into the oil pan. ~1.75” Barb to NPT.
Roughly the area where NPT fitting will go into the oil pan. ~1.75” Barb to NPT.
0 2026/03/30 19:55:00
Roughly the angle of attack the hose would come down through the engine bay.
Roughly the angle of attack the hose would come down through the engine bay.
0 2026/03/30 20:01:11
Can y’all help me identify these?
Can y’all help me identify these?
0 2026/03/30 20:08:32
This is on the driver’s side by the strut.
This is on the driver’s side by the strut.
0 2026/04/01 16:19:41
I cut back some of the plastic cover.
I cut back some of the plastic cover.
0 2026/04/01 23:00:46
I followed the wire and it goes to the furthest right grommet.
I followed the wire and it goes to the furthest right grommet.
0 2026/04/01 23:00:55
It ain’t pretty, but it is drilled, tapped, and JB Welded on.
It ain’t pretty, but it is drilled, tapped, and JB Welded on.
0 2026/04/06 15:15:07
0 2026/04/11 15:42:54
0 2026/04/11 15:42:57
0 2026/04/11 15:43:00
0 2026/04/11 15:43:03
0 2026/04/14 20:55:20
To clear out any remaining shavings, I did the responsible thing and used my leaf blower. Theoretically made ~0.5 psi of leaf boost 🤣
To clear out any remaining shavings, I did the responsible thing and used my leaf blower. Theoretically made ~0.5 psi of leaf boost 🤣
0 2026/04/14 20:55:22
0 2026/04/22 10:04:52
0 2026/04/22 10:04:55
0 2026/04/22 10:04:58
0 2026/04/22 10:05:08
0 2026/04/23 12:01:11
0 2026/04/23 12:01:14
0 2026/04/23 12:01:18
0 2026/04/23 22:24:15
0 2026/04/23 22:24:33
0 2026/04/23 22:24:58
0 2026/04/23 22:25:15