Miata Turbo Forum - Boost cars, acquire cats.
0 2018/08/21 08:50:37
0 2018/08/21 08:50:32
0 2018/08/21 08:50:22
0 2018/07/17 09:48:33
0 2018/07/17 09:35:04
0 2017/06/04 08:48:55
0 2017/06/04 07:27:27
Am I a complete tool making AFR tables?
Am I a complete tool making AFR tables?
0 2017/06/04 07:18:53
Megalog likes to do a similar thing.
Megalog likes to do a similar thing.
0 2017/06/04 07:16:13
The 5750rpm and low load always VEAL to these, or higher numbers.
The 5750rpm and low load always VEAL to these, or higher numbers.
0 2017/06/04 07:16:10
0 2017/01/19 19:53:17
0 2017/01/19 18:54:55
0 2016/12/13 07:31:05
0 2016/12/13 07:30:59
The setting for the trigger wheels.
The setting for the trigger wheels.
0 2016/12/12 14:09:59
from 1.3.4 to 1.4.0 there a was no error code going to 1.4.1 so screw adding more pics.
from 1.3.4 to 1.4.0 there a was no error code going to 1.4.1 so screw adding more pics.
0 2016/12/12 14:09:53
from 1.2.4 to 1.3.4 lots of errors and this is where the idle control got turned off.
from 1.2.4 to 1.3.4 lots of errors and this is where the idle control got turned off.
0 2016/12/12 14:09:49
0 2016/12/12 12:19:17
0 2016/12/12 08:52:53
0 2016/12/10 12:04:23
0 2016/12/10 12:01:17
0 2016/12/05 08:31:51
Made new ignition wires. Apparently the MSD ones for a V8 Dodge share the same plug ends. Now I have enough for another set. Just have to order the correct crimp connectors and voila!.
Made new ignition wires. Apparently the MSD ones for a V8 Dodge share the same plug ends. Now I have enough for another set. Just have to order the correct crimp connectors and voila!.
0 2016/11/20 18:04:49
Had the move the intake filter slightly closer to the pass fender behind the headlight. As it sat the filter was right under the opening.
Had the move the intake filter slightly closer to the pass fender behind the headlight. As it sat the filter was right under the opening.
0 2016/11/20 18:04:37
I do think it is sexy though.
I do think it is sexy though.
0 2016/11/20 18:04:32
Cut a bit wide. Meh.
Cut a bit wide. Meh.
0 2016/11/20 18:04:16
Time to break out the air tools and spend half my time waiting for the compressor to catch up.
Time to break out the air tools and spend half my time waiting for the compressor to catch up.
0 2016/11/20 18:03:59
I made this from an old water neck before I built the engine. Didn't install it at the time. With the nick it couldn't hurt to plug up that hole.
I made this from an old water neck before I built the engine. Didn't install it at the time. With the nick it couldn't hurt to plug up that hole.
0 2016/11/20 18:03:41
0 2016/11/15 19:17:30
0 2016/11/15 19:16:49
0 2016/11/15 19:15:53
0 2016/11/15 19:15:47
0 2016/11/15 19:12:03
0 2016/11/15 19:10:14
0 2016/11/15 19:09:31
0 2016/11/15 19:09:12
0 2016/11/06 15:16:21
0 2016/11/06 15:16:20
0 2016/11/06 15:16:18
0 2016/11/06 15:16:15