Miata Turbo Forum - Boost cars, acquire cats.
Somewhere out of Greytown
Somewhere out of Greytown
0 2016/01/30 20:32:20
Selfie with the Girlfriend
Selfie with the Girlfriend
0 2016/01/30 20:32:09
A massive house we stayed in with some friends in Greytown
A massive house we stayed in with some friends in Greytown
0 2016/01/30 20:32:05
It had a pool which was great!
It had a pool which was great!
0 2016/01/30 20:31:50
Wellington Harbour
Wellington Harbour
0 2016/01/30 20:31:38
The commodore on the ferry
The commodore on the ferry
0 2016/01/30 20:31:25
This thing was loaded up to the roof
This thing was loaded up to the roof
0 2016/01/30 20:31:17
0 2016/01/30 20:31:15
Awesome photo of the fender braces installed...
Awesome photo of the fender braces installed...
0 2015/12/12 22:50:35
Silicone Heat-wrap which looks much better IMO
Silicone Heat-wrap which looks much better IMO
0 2015/12/12 22:50:30
Another shot of the cold-side and BOV
Another shot of the cold-side and BOV
0 2015/12/12 22:50:20
Engine bay almost done
Engine bay almost done
0 2015/12/12 22:50:07
The diff and transmission fluid I used and the heat-wrap I decided I didn't like
The diff and transmission fluid I used and the heat-wrap I decided I didn't like
0 2015/12/12 22:49:54
Horrible glare photo
Horrible glare photo
0 2015/12/12 22:40:23
Starting to look line an engine bay
Starting to look line an engine bay
0 2015/12/12 22:40:17
Isn't actually much clearance between the radiator and the sway bar.
Isn't actually much clearance between the radiator and the sway bar.
0 2015/12/12 22:40:07
Mounted coldside
Mounted coldside
0 2015/12/12 22:40:00
Cold-side finished polished and BOV
Cold-side finished polished and BOV
0 2015/12/12 22:39:50
0 2015/12/12 22:39:38
Waterlines
Waterlines
0 2015/12/12 22:39:25
Cold side all routed. need to clock it a little further, so its not on the frame rail
Cold side all routed. need to clock it a little further, so its not on the frame rail
0 2015/11/16 01:17:01
The blue and red really annoys my inner ocd
The blue and red really annoys my inner ocd
0 2015/11/16 01:16:53
Rerouted my oil feed line and OPS
Rerouted my oil feed line and OPS
0 2015/11/16 01:16:45
-6 waterlines done apart from heat wrapping
-6 waterlines done apart from heat wrapping
0 2015/11/16 01:16:40
Found this and had a good laugh
Found this and had a good laugh
0 2015/11/16 01:16:30
0 2015/11/06 01:26:04
0 2015/11/06 01:22:57
Package turned up from carbon miata
Package turned up from carbon miata
0 2015/11/04 01:05:16
Stoked with the speaker panels :)
Stoked with the speaker panels :)
0 2015/11/04 01:05:06
Downpipe under way.
Downpipe under way.
0 2015/11/04 01:05:02
Needed a little bit more clearance from the rail.
Needed a little bit more clearance from the rail.
0 2015/11/04 01:04:53
Need to replace this bushing it is absolutely fubared
Need to replace this bushing it is absolutely fubared
0 2015/11/02 01:38:17
Changed the OP sender and oil feed setup this shouldn't snap off now. Will mount the sender to the frame rail with some sort of P clamp or similar
Changed the OP sender and oil feed setup this shouldn't snap off now. Will mount the sender to the frame rail with some sort of P clamp or similar
0 2015/11/02 01:37:55
Hotside all sorted. Need to pull the Inter cooler forward at the bottom to gain some clearance between the water hose
Hotside all sorted. Need to pull the Inter cooler forward at the bottom to gain some clearance between the water hose
0 2015/11/02 01:37:49
Need to replace this bushing its absolutely fubared
Need to replace this bushing its absolutely fubared
0 2015/11/02 01:30:06
Put a flexible hose between the block and the tee. I Imagine this should be loads better with vibration going to use some sort of P clamp to mount the OP sender to the frame rail should be tidy enough.
Put a flexible hose between the block and the tee. I Imagine this should be loads better with vibration going to use some sort of P clamp to mount the OP sender to the frame rail should be tidy enough.
0 2015/11/02 01:29:43
Hotside IC piping is done need to mount the bottom of the intercooler forward to gain clearance will use some aluminum to do this
Hotside IC piping is done need to mount the bottom of the intercooler forward to gain clearance will use some aluminum to do this
0 2015/11/02 01:29:37
0 2015/10/27 21:52:31
Have since sold the flat deck and got a proper tray
Have since sold the flat deck and got a proper tray
0 2015/10/27 21:52:20
1980 Mazda B1600 with a BP coversion and front and rear suspension :) its a miata ute basically
1980 Mazda B1600 with a BP coversion and front and rear suspension :) its a miata ute basically
0 2015/10/27 21:52:12