Miata Turbo Forum - Boost cars, acquire cats.
0 2015/10/25 22:26:44
Yay
Yay
0 2015/10/25 22:26:33
Pulled the IM again to keep m2cupcar haapy Going to solid mount my opg and run a flexible hose to the block.
Pulled the IM again to keep m2cupcar haapy Going to solid mount my opg and run a flexible hose to the block.
0 2015/10/25 22:26:24
Got a tidy new gearbox from my parts guy will get that in this weekend too hopefully.
Got a tidy new gearbox from my parts guy will get that in this weekend too hopefully.
0 2015/10/23 17:27:51
Installed in the car note my random green clutch line
Installed in the car note my random green clutch line
0 2015/10/23 17:27:38
Autoclutch Custom built this clutch setup for my car very happy with their business so far hoping it will hold up well. Its a carbon kevlar faced clutch plate with a modified cover plate for more clamping force
Autoclutch Custom built this clutch setup for my car very happy with their business so far hoping it will hold up well. Its a carbon kevlar faced clutch plate with a modified cover plate for more clamping force
0 2015/10/23 17:27:32
Gauges and control panel all mounted for the last time....needs more stainless things IMO will get the car going first
Gauges and control panel all mounted for the last time....needs more stainless things IMO will get the car going first
0 2015/10/23 17:27:23
And the petrol car you could build for that price....
And the petrol car you could build for that price....
0 2015/10/23 17:23:54
It was really well built. Needed more turbo
It was really well built. Needed more turbo
0 2015/10/23 17:23:45
0 2015/09/28 22:49:49
Made a panel for the gauges in MDF and vinyl on top.
Made a panel for the gauges in MDF and vinyl on top.
0 2015/09/20 02:18:10
Wrapped the top bolster on the right. Left is factory.
Wrapped the top bolster on the right. Left is factory.
0 2015/09/20 02:18:02
Put back together. It looks ok but not 100% happpy with it. Mounted the sterio and hooked up the lc-1 and boost controller. There is a serious amount of wiring behind here
Put back together. It looks ok but not 100% happpy with it. Mounted the sterio and hooked up the lc-1 and boost controller. There is a serious amount of wiring behind here
0 2015/09/20 02:17:52
Vinyl wrapped the speaker panels. (The line came out with the heat gun)
Vinyl wrapped the speaker panels. (The line came out with the heat gun)
0 2015/09/20 02:17:43
Pulled my boost gauge apart. Wouldn't recommend it unless you are very patient, Im not. This is primer
Pulled my boost gauge apart. Wouldn't recommend it unless you are very patient, Im not. This is primer
0 2015/09/20 02:17:34
Its a bit dusty now but vacuums up mint
Its a bit dusty now but vacuums up mint
0 2015/09/20 02:17:26
Got all the boot carets in. I have never had any in this car and got them with the interior carpet
Got all the boot carets in. I have never had any in this car and got them with the interior carpet
0 2015/09/20 02:17:19
Talked to the clutch shop. Freshly skimmed flywheel. The clutch I am getting is a modified pressure plate and a full faced kevlar clutch disk. Apparently I will never need to do a clutch again for this vehicle. I will be happy if its true
Talked to the clutch shop. Freshly skimmed flywheel. The clutch I am getting is a modified pressure plate and a full faced kevlar clutch disk. Apparently I will never need to do a clutch again for this vehicle. I will be happy if its true
0 2015/09/17 23:07:15
Finally tidied the injector loom. I'm glad I did as two of the water temp sender wires were half broken. Im hoping this will explain why the gauge went berserk sometimes.
Finally tidied the injector loom. I'm glad I did as two of the water temp sender wires were half broken. Im hoping this will explain why the gauge went berserk sometimes.
0 2015/09/17 23:06:58
Going to mount this under the stereo this time. Mainly because don't actually look at gauges all that much and vents have more priority. I will polish the scratches out before it goes back in.
Going to mount this under the stereo this time. Mainly because don't actually look at gauges all that much and vents have more priority. I will polish the scratches out before it goes back in.
0 2015/09/13 02:44:55
Have pulled off the aluminum edge and am going to paint it black to suit the edge on the afr gauge.
Have pulled off the aluminum edge and am going to paint it black to suit the edge on the afr gauge.
0 2015/09/13 02:44:47
Seats cleaned up and back in. (On the look out for some track seats) not that I have the money at the moment.
Seats cleaned up and back in. (On the look out for some track seats) not that I have the money at the moment.
0 2015/09/13 02:44:39
Intake manifold back on, radiator in. Injectors in. Need to do some work to the injector harness its pretty rough.
Intake manifold back on, radiator in. Injectors in. Need to do some work to the injector harness its pretty rough.
0 2015/09/13 02:44:31
Used the OPG route because no feed on turbo side :( pretty happy really came out tidy enough. I really hope nothing will leak
Used the OPG route because no feed on turbo side :( pretty happy really came out tidy enough. I really hope nothing will leak
0 2015/09/13 02:44:21
Finshed hot side
Finshed hot side
0 2015/09/10 22:14:33
New water hoses much silicone
New water hoses much silicone
0 2015/09/10 22:14:31
400 grit and some polishing
400 grit and some polishing
0 2015/09/10 22:14:25
320 Grit
320 Grit
0 2015/09/10 22:14:17
Ugly
Ugly
0 2015/09/10 22:14:08
Before I started. Raw mill finish
Before I started. Raw mill finish
0 2015/09/10 22:13:59
240 grit
240 grit
0 2015/09/10 22:13:37
120 grit
120 grit
0 2015/09/10 22:13:31
Steering dust covers came for a couple of my joints that didn't get replaced. Front suspension is ready to go now. Aside from an alignment that is.
Steering dust covers came for a couple of my joints that didn't get replaced. Front suspension is ready to go now. Aside from an alignment that is.
0 2015/09/04 20:26:57
Got the steering wheel in for good. Got it from Japan last year when I was over there. As far as I know its genuine
Got the steering wheel in for good. Got it from Japan last year when I was over there. As far as I know its genuine
0 2015/09/04 20:26:42
Am going to make some panels to cover the wiring once the car is done. should look tidy imo.
Am going to make some panels to cover the wiring once the car is done. should look tidy imo.
0 2015/09/04 20:20:54
Alternator got cleaned/tested and came back good. wiring almost sorted on this side. Have decide to take my oil feed from the oil pressure sender. Not 100% on taking it off the head. The easy things never seem to pay off.
Alternator got cleaned/tested and came back good. wiring almost sorted on this side. Have decide to take my oil feed from the oil pressure sender. Not 100% on taking it off the head. The easy things never seem to pay off.
0 2015/09/04 20:20:37
Got some matching lights. The old ones were completely different to each other and were sealed units. Fixed the linkage on the drivers side. It has been loose and rattly for the last 5 years
Got some matching lights. The old ones were completely different to each other and were sealed units. Fixed the linkage on the drivers side. It has been loose and rattly for the last 5 years
0 2015/09/04 20:20:23
Under sealed the tranny tunnel. Even though it will get filthy as soon as I start driving it.
Under sealed the tranny tunnel. Even though it will get filthy as soon as I start driving it.
0 2015/09/04 20:12:43
Need to mount this somehow at least most of the wiring is how it will stay now. Just have the boost controller to mount now.
Need to mount this somehow at least most of the wiring is how it will stay now. Just have the boost controller to mount now.
0 2015/09/04 20:11:05
Moved the LC-1 hoping I can run the sensor down the hole of the gear stick. Anyone else done this?
Moved the LC-1 hoping I can run the sensor down the hole of the gear stick. Anyone else done this?
0 2015/09/04 20:06:41