Miata Turbo Forum - Boost cars, acquire cats.
0 2016/06/07 08:24:03
0 2016/06/07 07:52:33
0 2016/06/07 07:50:02
0 2016/06/06 12:01:53
0 2016/06/02 07:21:57
finished up the Side pipes on both sides Monday night. it was a ton of work. good 3 day project.
finished up the Side pipes on both sides Monday night. it was a ton of work. good 3 day project.
0 2016/05/31 12:20:17
up swept headers.mmmmmm i had to ditch my holley valve covers and go back to stock. i'll also need ASA plug wires to run around the headers.
up swept headers.mmmmmm i had to ditch my holley valve covers and go back to stock. i'll also need ASA plug wires to run around the headers.
0 2016/05/31 12:19:34
i think overall the header runners are a good 3' long.
i think overall the header runners are a good 3' long.
0 2016/05/31 12:19:01
but got back to work and kept cutting.
but got back to work and kept cutting.
0 2016/05/31 12:18:17
next day i was feeling a down on progress. so thought about going to a demo Derby.
next day i was feeling a down on progress. so thought about going to a demo Derby.
0 2016/05/31 12:17:50
end of sat, this is how it looked.
end of sat, this is how it looked.
0 2016/05/31 12:17:28
ran out of header piper really quick so i had to make a summit run, and get some more 1.75" tube.
ran out of header piper really quick so i had to make a summit run, and get some more 1.75" tube.
0 2016/05/31 12:16:33
i just started cutting and tacking.
i just started cutting and tacking.
0 2016/05/31 12:15:58
sterted off with an idea of where i wanted to run it.
sterted off with an idea of where i wanted to run it.
0 2016/05/31 12:15:27
0 2016/05/19 15:43:49
0 2016/05/18 14:09:52
0 2016/05/18 14:09:28
0 2016/05/18 14:09:08
0 2016/04/26 11:02:19
0 2016/04/26 10:59:33
0 2016/04/25 07:14:16
0 2016/04/11 11:55:49
0 2016/04/11 11:55:19
took a few days off to Work a PCA event, cleaned up the garage. and busted out the plasma. made enough room for 2.5" side pipes. they will be covered by the factory side skirts, until the melt. after that i'll figure out something else. maybe make something from bent aluminum.
took a few days off to Work a PCA event, cleaned up the garage. and busted out the plasma. made enough room for 2.5" side pipes. they will be covered by the factory side skirts, until the melt. after that i'll figure out something else. maybe make something from bent aluminum.
0 2016/04/05 11:45:43
yea the welds suck but you get the point. they where ground down and re welded also a gusset will be added.
yea the welds suck but you get the point. they where ground down and re welded also a gusset will be added.
0 2016/04/05 11:38:01
we don't need no stinking fenders.
we don't need no stinking fenders.
0 2016/04/05 11:37:34
fire wall was tacked in, it was so humid out it began to rust.
fire wall was tacked in, it was so humid out it began to rust.
0 2016/04/05 11:36:46
atlas bar.
atlas bar.
0 2016/04/05 11:35:44
drum roll, the dry sump tank has a home. i'm planning on building the firewall out so i can't access the tank from the inside. this should give me time to get out if there is a fire.
drum roll, the dry sump tank has a home. i'm planning on building the firewall out so i can't access the tank from the inside. this should give me time to get out if there is a fire.
0 2016/04/05 11:34:43
it's a mess but nodes are nodes.
it's a mess but nodes are nodes.
0 2016/04/05 11:34:07
the motor goes in-out-in-out
the motor goes in-out-in-out
0 2016/04/05 11:33:42
the new fire wall.
the new fire wall.
0 2016/04/05 11:33:20
lots of cutting got me here.
lots of cutting got me here.
0 2016/04/05 11:32:55
finishing the foot box and supporting the upper bars.
finishing the foot box and supporting the upper bars.
0 2016/04/05 11:32:27
more ideas laid out.
more ideas laid out.
0 2016/04/05 11:32:08
the c3 was covered before sparks flew.
the c3 was covered before sparks flew.
0 2016/04/05 11:30:35
0 2016/04/04 06:40:03
0 2016/04/01 06:51:24
0 2016/04/01 06:51:06
0 2016/03/28 10:49:39