Miata Turbo Forum - Boost cars, acquire cats.
The unpinned blue wire is the antenna power wire. I am going to put it on a switch, as the antenna goes up whenever the radio powers on, regardless of audio source.
The unpinned blue wire is the antenna power wire. I am going to put it on a switch, as the antenna goes up whenever the radio powers on, regardless of audio source.
0 2022/03/15 20:58:05
Shout out to this random radio bracket that came in my NA. It's probably 20 years old.
Shout out to this random radio bracket that came in my NA. It's probably 20 years old.
0 2022/03/15 20:58:02
The radio in and amp out wires crimped together with these super nice crimps. The remaining depinned black and orange wires are the signal wire shielding.
The radio in and amp out wires crimped together with these super nice crimps. The remaining depinned black and orange wires are the signal wire shielding.
0 2022/03/15 20:58:00
The pile of audio cables, still completely NB2 Bose stock.
The pile of audio cables, still completely NB2 Bose stock.
0 2022/03/15 20:57:58
0 2022/03/13 19:49:10
0 2022/03/13 19:49:08
0 2022/03/13 19:49:05
0 2022/03/13 19:48:58
0 2022/03/13 19:48:52
0 2022/03/13 19:48:44
0 2022/03/13 19:48:35
0 2022/03/13 19:48:27
0 2022/03/13 19:48:19
0 2022/03/13 19:48:11
0 2022/03/13 19:48:04
0 2022/03/13 19:47:56
Both rears, stripped clean and ready for paint.
Both rears, stripped clean and ready for paint.
0 2022/03/13 19:45:36
I reinforced the rear sway bar mounts beyond what I had done previously. This should let me run the end links backwards like I had done previously without fear of ripping them out.
I reinforced the rear sway bar mounts beyond what I had done previously. This should let me run the end links backwards like I had done previously without fear of ripping them out.
0 2022/03/13 19:45:27
I added some weld to the sway bar mount gooches in the front control arms. They've never been an issue, but I figure I will get ahead of it.
I added some weld to the sway bar mount gooches in the front control arms. They've never been an issue, but I figure I will get ahead of it.
0 2022/03/13 19:45:21
0 2022/03/13 19:45:14
0 2022/03/13 19:14:28
Drilled out the Skunk2 throttle body as people seem to say is needed. Right now I'm in the second from left hole, I am trying to use as little tension as possible.
Drilled out the Skunk2 throttle body as people seem to say is needed. Right now I'm in the second from left hole, I am trying to use as little tension as possible.
0 2022/03/13 19:14:21
Don't think I've posted this previously. The front ladder bar got bent back twice, so I heavily reinforced it.
Don't think I've posted this previously. The front ladder bar got bent back twice, so I heavily reinforced it.
0 2022/03/13 19:14:15
I eventually plan to swap out the fugly tan seat covers. The old seat hinges off the NA are better looking in my opinion, and not tan.
I eventually plan to swap out the fugly tan seat covers. The old seat hinges off the NA are better looking in my opinion, and not tan.
0 2022/03/13 19:14:06
Pretty easy to see how they fit in the part of the bushing that drops out.
Pretty easy to see how they fit in the part of the bushing that drops out.
0 2022/03/13 19:13:59
I got some Superpro diff bushing inserts. These should complement the poly motor mounts well. They accidentally sent me two sets!
I got some Superpro diff bushing inserts. These should complement the poly motor mounts well. They accidentally sent me two sets!
0 2022/03/13 19:13:50
Stripped clean and ready for paint.
Stripped clean and ready for paint.
0 2022/03/13 19:13:42
I reinforced the rear sway bar mounts beyond what I had done previously. This should let me run the end links backwards like I had done previously without fear of ripping them out.
I reinforced the rear sway bar mounts beyond what I had done previously. This should let me run the end links backwards like I had done previously without fear of ripping them out.
0 2022/03/13 19:13:32
I added some weld to the sway bar mount gooches in the front control arms. They've never been an issue, but I figure I will get ahead of it.
I added some weld to the sway bar mount gooches in the front control arms. They've never been an issue, but I figure I will get ahead of it.
0 2022/03/13 19:13:26
0 2022/03/13 19:13:19
Not my picture, but since my car came with the Bose sound system, it came with 8" round speakers. The base model uses these adapter mounts to fit 6x8 speakers in the same place. If I have the space with my flat door cards, I'd like to find a set and use them to install aftermarket 6x8 speakers.
Not my picture, but since my car came with the Bose sound system, it came with 8" round speakers. The base model uses these adapter mounts to fit 6x8 speakers in the same place. If I have the space with my flat door cards, I'd like to find a set and use them to install aftermarket 6x8 speakers.
0 2022/02/24 21:33:56
0 2022/02/24 21:13:10
0 2022/02/24 21:08:05
0 2022/02/23 15:11:30
0 2022/02/23 15:10:32
0 2022/02/23 15:10:31
0 2022/02/17 20:53:19
0 2022/02/17 20:53:17
0 2022/02/17 20:52:54
0 2022/02/08 20:56:32