Miata Turbo Forum - Boost cars, acquire cats.
0 2022/02/08 20:53:18
0 2022/02/08 20:53:13
0 2022/02/08 20:37:42
0 2022/02/07 09:01:29
0 2021/12/16 19:11:30
0 2021/12/16 19:11:27
0 2021/12/16 19:02:07
0 2021/12/16 18:56:07
0 2021/12/16 18:10:17
0 2021/12/16 18:10:09
Window switch close up
Window switch close up
0 2021/08/26 19:26:50
Window switch, fuel rail, prop valve
Window switch, fuel rail, prop valve
0 2021/08/26 19:26:41
Window switch, pro
Window switch, pro
0 2021/08/26 19:26:30
EGR blockoff
EGR blockoff
0 2021/08/26 19:26:18
pressure plate
pressure plate
0 2021/08/26 19:26:10
FM clutch setup
FM clutch setup
0 2021/08/26 19:26:00
0 2021/08/26 19:25:49
DW200
DW200
0 2021/08/26 19:25:38
DW200
DW200
0 2021/08/26 19:25:27
0 2021/08/26 16:33:53
0 2021/08/26 16:33:51
0 2020/10/01 16:29:15
0 2020/09/21 09:51:27
But the coolest kid was hanging out on his own.
But the coolest kid was hanging out on his own.
0 2020/09/21 09:32:51
Fancy stuff here. The flick, backing plates, and bolts
Fancy stuff here. The flick, backing plates, and bolts
0 2020/09/21 09:28:03
A little closer view.
A little closer view.
0 2020/09/21 09:27:53
View from the front.
View from the front.
0 2020/09/21 09:27:42
The coolest kid, sitting off on his own.
The coolest kid, sitting off on his own.
0 2020/09/21 07:59:52
Swapping rotors between sessions.
Swapping rotors between sessions.
0 2020/09/21 07:59:40
The cool kids hanging out together at Gingerman.
The cool kids hanging out together at Gingerman.
0 2020/09/21 07:59:30
Hey, look my odometer is at exactly 150k on the way to a track day!
Hey, look my odometer is at exactly 150k on the way to a track day!
0 2020/09/15 09:53:55
Showcasing the finest 3M DP-420 epoxy that was used to secure the threaded insert.
Showcasing the finest 3M DP-420 epoxy that was used to secure the threaded insert.
0 2020/09/15 09:53:46
While I was fiddling about, something made me check the air filter. Wish I had done that at the start of the season...
While I was fiddling about, something made me check the air filter. Wish I had done that at the start of the season...
0 2020/09/15 09:08:50
Oh look, the wiring harness just about wore a hole through the intake resonator. Slap some velcro on there to keep it from happening again.
Oh look, the wiring harness just about wore a hole through the intake resonator. Slap some velcro on there to keep it from happening again.
0 2020/09/15 09:08:35
Here's the backside of the old door card. Check out the lovely mold and water damage - the vapor barriers definitely work.
Here's the backside of the old door card. Check out the lovely mold and water damage - the vapor barriers definitely work.
0 2020/09/15 08:47:34
Not perfect, but it's better than cutting off the back portion! Check out that nice new unwarped door card.
Not perfect, but it's better than cutting off the back portion! Check out that nice new unwarped door card.
0 2020/09/15 08:47:18
I used a hole saw to give the seat shoulder wing a place to tuck into
I used a hole saw to give the seat shoulder wing a place to tuck into
0 2020/09/15 08:47:07
What you see here is over an hours worth of work with Goo Gone and a plastic scraper to get all the butyl off.
What you see here is over an hours worth of work with Goo Gone and a plastic scraper to get all the butyl off.
0 2020/09/15 08:46:57
I cleaned out the thick old grease on the brackets, regreased, and replaced the slider boots.
I cleaned out the thick old grease on the brackets, regreased, and replaced the slider boots.
0 2020/09/15 08:28:24
Here's my new favorite way to keep fluid from draining out of the lines with a caliper off - just depress the pedal enough to cover the fill port in the master cylinder. A spare vise works fine.
Here's my new favorite way to keep fluid from draining out of the lines with a caliper off - just depress the pedal enough to cover the fill port in the master cylinder. A spare vise works fine.
0 2020/09/15 08:28:13