Miata Turbo Forum - Boost cars, acquire cats.
0 2017/06/25 01:24:34
0 2017/06/25 01:24:19
0 2017/06/25 01:23:37
0 2017/06/25 01:17:46
0 2017/06/25 01:17:32
0 2017/06/25 01:17:15
0 2017/06/25 01:17:02
0 2017/06/25 01:16:46
0 2017/06/25 01:16:32
0 2017/06/25 01:16:05
0 2017/06/25 01:09:38
0 2017/06/21 15:23:12
0 2017/06/21 15:05:47
0 2017/06/21 14:59:52
Huge gap on the top side of the radiator
Huge gap on the top side of the radiator
0 2017/06/19 23:40:15
Huge gap on the sides of the radiator
Huge gap on the sides of the radiator
0 2017/06/19 23:40:03
Radiator mounting brackets with PVC profiles
Radiator mounting brackets with PVC profiles
0 2017/06/19 23:39:55
L brackets seal the side of the radiator
L brackets seal the side of the radiator
0 2017/06/19 23:39:44
Upper gap closed
Upper gap closed
0 2017/06/19 23:39:33
In order to maximize airflow i bent the Hella supertones out of the way. They now point downwards and sit as far up as possible
In order to maximize airflow i bent the Hella supertones out of the way. They now point downwards and sit as far up as possible
0 2017/06/19 23:39:24
Intercooler sealed to the radiator. Gap is approx. 25mm
Intercooler sealed to the radiator. Gap is approx. 25mm
0 2017/06/19 23:39:14
Upper half of radiator gets clean air, thr lower half draws air through the intercooler
Upper half of radiator gets clean air, thr lower half draws air through the intercooler
0 2017/06/19 23:39:01
This took forever to get right
This took forever to get right
0 2017/06/19 23:38:47
0 2017/06/19 23:38:36
0 2017/06/19 23:38:23
Fits nicely
Fits nicely
0 2017/06/19 23:38:10
Radiator ducting in place. The two 8mm bokta is where the second undertray will bolt to
Radiator ducting in place. The two 8mm bokta is where the second undertray will bolt to
0 2017/06/19 23:37:54
0 2017/06/19 23:37:42
Cut undertray with a strip of aluminium as a structural reinforcement
Cut undertray with a strip of aluminium as a structural reinforcement
0 2017/06/19 23:37:30
Rear section attaches to threads in intercooler in the front and the stock threads in the subframe in the rear
Rear section attaches to threads in intercooler in the front and the stock threads in the subframe in the rear
0 2017/06/19 23:37:19
Flat underbody to maximize pressure differential between front of radiator and engine bay
Flat underbody to maximize pressure differential between front of radiator and engine bay
0 2017/06/19 23:37:08
Heatshield dickpic template FTW. We all love dicks here, don't we?
Heatshield dickpic template FTW. We all love dicks here, don't we?
0 2017/06/18 15:30:28
Wood blocks and a vise were used to press profiles into the aluminium
Wood blocks and a vise were used to press profiles into the aluminium
0 2017/06/18 15:30:14
No clearance yet
No clearance yet
0 2017/06/18 15:30:01
Took a hammer and went to town
Took a hammer and went to town
0 2017/06/18 15:29:47
Top lid for structural integrity
Top lid for structural integrity
0 2017/06/18 15:29:32
Clears downpipe, heater hoses and brake lines. Very sturdy construction
Clears downpipe, heater hoses and brake lines. Very sturdy construction
0 2017/06/18 15:29:19
*bling*
*bling*
0 2017/06/18 15:29:04
Hits from the bong, anyone?
Hits from the bong, anyone?
0 2017/06/15 14:50:57
0 2017/06/15 14:49:19