323 gtx 1.8l swap/starter question
2 Attachment(s)
After a bit of searching i am yet still not able to really find much info on the 323 gtx swap. I remember reading here that someone else had done the swap before but still cant seam to find it.
My question is, does a standard 1.8 starter and bracket just bolt up to the block? Here is a shot of a 1.6 starter ( dunno if there is a difference) to a 1.6 block. Attachment 210545 And here is a picture of that same starter and bracket attached to the back of it in place on the gtx motor Attachment 210546 How the fuck does it work? Do i need a 1.8 bracket? Are they even the same? Are the two bolts that hold the starter down with the tranny good enough? Is this something i need to fabricate? What have others done here? Thanks everyone |
2 bolts that hold it to tranny should be enough
|
+1 the 2 bolts should be fine. You also can't use the bracket when you change to a 6 speed box.
|
What would that bracket have to do with the gearbox?
|
All times are GMT -4. The time now is 04:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands