Anyone know a good way to plumb the iac in an na8 turbo build?
#1
Anyone know a good way to plumb the iac in an na8 turbo build?
It's in a 1997 na8 Miata and I'm struggling to route this iacv into the intake like I'm supposed to. its like right next to the hose it needs to go into so I can't really do a fitting, and any tube to route elsewhere would have such a sharp bend it would kink up. Also can't make the 90 degree go any farther away from the intake manifold cause it will hit the radiator.
First post sorry about any mistakes.
#9
Cpt. Slow
iTrader: (25)
Join Date: Oct 2005
Location: Oregon City, OR
Posts: 14,205
Total Cats: 1,138
Run a NB throttle body. Smaller IAC valve that's all internal, just need to change your TPS and IAC pigtail. If you order a S2 throttle body, get the NA one, and order this adapter: https://www.speedsageengineering.com...b-iacv-adapter
Then you can run your NA TPS/pigtail, an NB IAC, and only change one pigtail. You'll also need to source the IAC of course.
Then you can run your NA TPS/pigtail, an NB IAC, and only change one pigtail. You'll also need to source the IAC of course.
Thread
Thread Starter
Forum
Replies
Last Post
Nzmx5
Meet and Greet
0
10-16-2022 12:13 AM