base timing question?
05-24-2007, 03:01 PM
#2
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,019
Total Cats: 6,587
What kind of gasoline?
Any intercooling?
Greddy calls for 6 degrees BTDC, and that's assuming 5PSI and 93 R+M gasoline. If you're doing 8 PSI I'd probably go down to 4 degrees or less, though your EGTs will really start climbing at this point.
If you're not going to go Piggyback, I'd at least start browsing for a used Bipes ACU.
Any intercooling?
Greddy calls for 6 degrees BTDC, and that's assuming 5PSI and 93 R+M gasoline. If you're doing 8 PSI I'd probably go down to 4 degrees or less, though your EGTs will really start climbing at this point.
If you're not going to go Piggyback, I'd at least start browsing for a used Bipes ACU.
Reply
0
0
05-24-2007, 04:12 PM
#3
Junior Member
Thread Starter
Join Date: Dec 2005
Posts: 258
Total Cats: 0
i've got emanage for timing and fuel for now, still need to find a base map, i will eventually put in oldguys o2 clamp and autotune, and already installed starion intercooler. i have 89 octane gas in the tank right now but plan on bumping it to 91 when my tank goes down. just wondering, whats stock timing?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
