so my begi intercooler piping will come with 50mm flange for tial bov but unfortunately i dont have any more $$ to blow at this time so no $200 tial for me :/

any idea which cheap bov will be able to bolt up to that flange?

 

I am not aware of any BOV (other than a fake TiAL) that will bolt to it.. HKS SSQV flanges will sit in the tial flange, making for a easy weld on affair. Of course, the HKS is no cheaper, and by the time you buy the HKS flange.. well, you get the point.

 

The Tial flange is huge. And to top it off, there's a lip there for the flange that no hose is going to easily slide over. The only other one I can think of is a Synchronic, again, not cheap.

 

Synchronic flange is like half the size.. it's slighly bigger than a TurboXS flange, as I recall.

 

One other thing, is the flange welded to the intake tubing? Mine is attached with a silicon hose and their tial adapter.

 

Yeah, the standard synchronic flange is small, but they sell an adapter. Again, not cheap.

 

no idea... will see when kit comes here

 

I have the tial..
i got the flange welded to tubing, bov gets clamped to the flange, o-ring in between...

+1 for maybe checkin into a knockoff tial...might be ur best bet if its welded

http://www.siliconeintakes.com/index...b1d9b25fae4971

Or maybe u can return that piece of tubing, and go with another bov and make ur own pipe...

I made my own pipes, and bought bov seperately....