Terrh

I've got a 1991 1.6. It's leaked oil ever since I got it and finally the leak has gotten bad enough (and killed my alternator) that I decided to fix it. The front main or oil pump gasket is leaking. I'm trying to get the oil pump off but it don't wanna budge. Is there something internal holding it in place? I'm about to start pulling the pan but don't want to if I don't have to!

Terrh

did more googling and apparently the motor is coming out. My clutch is kinda **** anyways, now's as good a time as any./

tpwalsh

BTDT, the motor has to come out. If I remember correctly the bolts to hold it in place are under the oil pan, which is blocked by the crossmember. Lesson learned: Don't forget the o-ring that connects the oil pump to the block.....

Savington

iTrader: (31)

Motor's gotta come out. Pull the motor, then pull the crank pulley, front covers, timing belt, oil pan, and the oil pickup tube. Then you can pull the pump off. Remember to buy a new oil pump o-ring, oil pickup gasket, and a new crank bolt/crank key at the bare minimum.

dubtastic

Don't lose the woofruff key!