Did I just waste my time and money?
I just bought a complete rear end off of an automatic 96 miata m edition. From what I read its not lsd can someone confirm this before I bolt this up? I spent $600...:facepalm:
|
|
was it made from solid 18k or 24k gold?
|
Not standard on M Edition. Was an option for the regular models, but who would put an LSD in an auto trans car?
http://www.miata.net/faq/miatachanges.html |
does anyone wanna sell me a pumpkin for a decent price?
|
got one for ya. $800
|
ratio?
|
Originally Posted by matthewdesigns
(Post 902562)
Not standard on M Edition. Was an option for the regular models, but who would put an LSD in an auto trans car?
Year But....not on the automatics. Automatic = no LSD. Don't think it was an option on any automatic 1990-1997 (and likely 1999-2005 and even 2006+). Sorry, but yes, you wasted your money. :( |
i have an 03 clutch diff. With carrier. Need pignose.
$600. |
You paid twice as much as I did for the same parts, except I got an RX7 housing and one piece NB axles.
Gotta do your research next time, man. |
Originally Posted by wildo
(Post 902579)
Actually the Torsen was standard on the 1996 M-Edition and most if not all special editions (except the 1997 STO).
|
are LSD's really worth that much? i bought a complete straight 97 subframe with LSD, brakes, suspension from a dismantler for $300
|
I'm depressed a $600 rear just might turn into a $1200 rear
|
Originally Posted by fastivab6tg25mr
(Post 902648)
are LSD's really worth that much? i bought a complete straight 97 subframe with LSD, brakes, suspension from a dismantler for $300
|
Originally Posted by fastivab6tg25mr
(Post 902648)
are LSD's really worth that much? i bought a complete straight 97 subframe with LSD, brakes, suspension from a dismantler for $300
I picked up my 4.1 torsen (complete rear) for $200. axles for $100. driveshaft for $50. car-parts.com, use it. |
yeah I'm not sure what some people are smoking, but a whole torsen rear usually runs 300-700.....up to max 1k for the really nice MSM or 3.9fd setups......
but some rtards sell them for 1200-1600 and even bigger retards actually pay that kinda money for them, so why not make some good money lol |
Can someone explain to me what pumpkin i do have?
|
can you take a pic of the unit through tha axle holes?
|
2 Attachment(s)
Originally Posted by svazquez104
(Post 902748)
Can someone explain to me what pumpkin i do have?
Edit: If you look through the axle shaft hole and see a metal pin obstructing your view = open. If it looks like either pic below its a Torsen. I have Torsens available for less than you spent on your open. PM me if you are interested. https://www.miataturbo.net/attachmen...ine=1342200507 https://www.miataturbo.net/attachmen...ine=1342200507 |
I recently bought my complete Torsen type2 setup with axles, drive shaft, lower and upper A arms for $350. Came off a wrecked 7k mile NB. Only problem is the axles were non-abs. And my car has abs!
|
All times are GMT -4. The time now is 09:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands