Originally Posted by Linh
(Post 902842)
I recently bought my complete Torsen type2 setup with axles, drive shaft, lower and upper A arms for $350. Came off a wrecked 7k mile NB. Only problem is the axles were non-abs. And my car has abs!
|
Originally Posted by Linh
(Post 902842)
I recently bought my complete Torsen type2 setup with axles, drive shaft, lower and upper A arms for $350. Came off a wrecked 7k mile NB. Only problem is the axles were non-abs. And my car has abs!
|
Braineack,
From what I was told, the abs axles itself has these tone rings attached to them. The hub itself just mounts the rubber lines that guides the sensor to the tone rings on the axles. Correct me if I'm wrong. |
the end of the axles, where the abs ring gear is attached, that wobbles around on the shaft...that can be removed from the shaft.
does that make sense? you have to undo the rubber boot and pull it off. then you put your abs ones onto the shaft and repack the boot, and install them. |
This is very interesting, considering my diff might be on its way out... Stupid ------- car...
|
All times are GMT -4. The time now is 11:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands