DIY air splitter*** mod
12 Attachment(s)
well, I got really bored over the last few days,
and since its been below zero, i cant do anything on the miata. so I figured I would take this time to take off the stock air spliter thingy which is made out of this plastic stuff, and make one out of aluminum i bought 36"" by 36"' (inch) sheet of aluminum 19 dollars i got one can of primer 3 dollars one can of red paint 5 dollars total = 27 dollars traced the old one onto the sheet with a sharpy cut it out using a combo of garden sheers and a dremel drill holes for screws/etc sand the edges down so its not stupid sharp like a huge sword prime paint enjoy<--in progress,, way too cold to go outside to put it back on pics of process i took for shits and giggles comment away Attachment 214927 Attachment 214928 Attachment 214929 Attachment 214930 Attachment 214931 Attachment 214932 Attachment 214933 Attachment 214934 Attachment 214935 on car (i grew balls and went out side it wasn't as cold today) Attachment 214936 Attachment 214937 Attachment 214938 |
where did you get the metal from?
|
You can get metal like that from lowes, it's more expensive there than what you would pay at a scrap or metal fab shop though.
I can't believe your SN is urgaynknowit. Nice cover. |
Nice! Installed pictures are a must.
|
This post was a total letdown since the title led me to believe that you had made a diy front air dam. Oh well. It looks good anyway.
|
i'm going to attempt a plywood splitter in the future, good job on the dam, i need to do this since mine is sitting somewhere warped
|
i lost my tdr cowl cover and im going to do same thing sometime next week
|
Nice, I may have to do this now..
|
edit - new pics added
mazda/nissan - i got mine from home depot cjernigan - no fab shops near me, and home depot is close and yea, i wanted an original name, so i use this one i use it on everything from turbo miata, to club roadster to aim and xbox live jasonrobo02 - sorry :( i didnt know what to call it, i changed the title once i read ur post UrbanSoot & ApexOnYou - DO IT |
Is there any reason why you wouldn't be able to leave it unpainted and maybe polish it up a bit? I think I might try it out with some leftover scrap from a friends DIY heatshield.
|
I dont see why not,
i just wanted a clean look with the bumper, so i used paint that matched i also did my valve cover today too lol i was soooo bored!!, im liking the red |
All times are GMT -4. The time now is 04:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands