Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   General Miata Chat (https://www.miataturbo.net/general-miata-chat-9/)
-   -   EGT gauge, what is your experience (https://www.miataturbo.net/general-miata-chat-9/egt-gauge-what-your-experience-34606/)

Miatamaniac92 05-01-2009 02:03 AM

EGT gauge, what is your experience
 
So I just got a new miataroadster 3 gauge a-pillar panel in the mail and I'm gauge shopping.

I've pretty much decided on (Westach, Westach):
boost gauge (already got a used cheap BEGI branded one locally)
oil/water temp (2dc3-138, http://www.westach.com/catalog/index...e=PAGE12s.html)
afr/egt (2dc2-56, http://www.westach.com/catalog/index...e=PAGE10s.html)

My questions:
Who on here actually uses their EGT gauge and what's been your experience? Looking back, do you feel it is a necessary gauge and why or why not?

Do you only use it for tuning?

Is it a gauge you keep an eye on at the track?



My long term priorities. Daily and track driving. Eventually (sooner than later) running MS and playing around with some e85.

m2cupcar 05-01-2009 09:04 AM

I've got an autometer that goes to 1600f. If I did it again, it would have a higher max temp and it wouldn't be an autometer. This gauge has been ground at three different points and still has random needle fluctuations for no reason. It's not as bad as it was before, but it still happens on occasion.

TurboTim 05-01-2009 09:17 AM

I have an autometer but in 2000f. Mine never fluctuates fortunately. I bought it because WBO2's weren't around when I got it, so if I were to be starting from scratch I would just get that.

It doesn't tell me much, especially now that it's only in 2cyl's worth of exhaust.

hustler 05-01-2009 09:26 AM

EGT would be nice for tuning, but AFR tells you a lot more, sooner. I still have my greddy egt in a box.

You're going to get tired of searching for the Westach needles, those shitty gauges light up the car when you turn them sideways so I have old-school lightbulb glare in my face, I have to lean over to read the tiny-ass needle which is invisible at night, and it reads 18psi at a real 202kpa. I have the Westag BEGi boost gauge and I hate it.

You should look at Omori because they're accurate, supposedly have longer lives due to quality, and you can see them / they look good.

you make the call:
http://www.geocities.com/spencerhut/...-egt_gauge.jpg
http://www.j-spectuning.com/images/4..._greenB_DN.JPG

Also, in between posting "gay for pay" ads, Savington has a link to a probe and some electronics shit you can use to log EGT in MS. That's probably a better choice since you're considering MS in the future.

y8s 05-01-2009 10:47 AM


Originally Posted by hustler (Post 402908)
EGT would be nice for tuning, but AFR tells you a lot more, sooner. I still have my greddy egt in a box.

AFR gauges dont tell you you're retarded....


All times are GMT -4. The time now is 11:18 PM.


© 2024 MH Sub I, LLC dba Internet Brands