i have a little bump from the bondo on the bottom right side, i plan to sand it down more there and smoothen it out. Than it gets blasted with CLASSIC RED than i will stop getting looks from all the ricers thinkign im one of them.

 

thatl buff out

 

updated, put in my boost and WB gauge... any tips for routing the boost vac line through firewall? I couldnt get it through the grommet on the driver side (1.8) Should i run it to passenger side and through firewall? Will that cause too much "lag"


http://s93.photobucket.com/albums/l52/dow-tom/My%20Mx5/

 

with that thin nylon line I doubt extra length would be a problem. *cough*. I havent received any complaints on mine. LOLZ I ran mine through the firewall near the evaporator. Was kind of a pain but it works fine.

 

so running it from the driver side to the passenger side through the firewall, and T off the manifold is fine?

 

mine works fine like that. so long as there are no leaks i doubt you will have any problems lag will be insignificant at sub 10 ft lengths.

 

okay i'll do that, now i wanna find a good source to tap, i have CC but i dont use it, should i just tee it?

 

That looks really good.

 

thanks, the door panels are leather to match. bought it like that.