hell freezes over: hustler's progress thread
My step dad really wants this car out of his back yard and realized that he could help me out, in order to help himself. lol
http://i36.tinypic.com/217jx0.jpg http://i38.tinypic.com/2djp93o.jpg http://i35.tinypic.com/20gb8uf.jpg http://i34.tinypic.com/24opze8.jpg slight oil leak http://i33.tinypic.com/28i6v0i.jpg http://i34.tinypic.com/2hdr685.jpg http://i33.tinypic.com/dg2nms.jpg yes, there's progress on my car...hell has frozen over. |
Very nice, you have another, built motor right?
|
Originally Posted by hustler
(Post 285713)
yes, there's progress on my car...hell has frozen over.
|
... and actually turn a wrench on it yourself :)
|
Originally Posted by wes65
(Post 285715)
Very nice, you have another, built motor right?
|
So hustler is a checkbook racer, but doesn't actually use a checkbook?
The plot thickens! haha Is your other motor already assemble ready to go, or is still in progress? |
Originally Posted by Zabac
(Post 285721)
So hustler is a checkbook racer, but doesn't actually use a checkbook?
The plot thickens! haha Is your other motor already assemble ready to go, or is still in progress? Right now the coolant reroute flange drama is a fucking disaster. I just need a god damn flange, and no one can seem to put 2 and 2 together on a simple concept. |
Originally Posted by hustler
(Post 285723)
I'm waiting on my m-tuned fuel rail.
|
The outlet thingy i sent you could have a bung welded to it to accept any sensor...seems so simple, i dont know why no one has it out.
|
Originally Posted by Zabac
(Post 285748)
The outlet thingy i sent you could have a bung welded to it to accept any sensor...seems so simple, i dont know why no one has it out.
|
Wow, never thought this would actually happen.
Are you going to get the whole car done.. soon? |
Originally Posted by Fireindc
(Post 285765)
Wow, never thought this would actually happen.
Are you going to get the whole car done.. soon? lol:) |
Originally Posted by hustler
(Post 285762)
I don't have any machine tools, so I'm pretty much fucked up the asshole.
This is not complicated, you just need some flat stock 1/4-1/2" Al and give them dimensions of what you want done, they could spit 10-20 of these in a few hours for less than $20 each. Way less I assume. |
what are we talking about?
|
btw, is that a clear hose for the slave line?
|
Originally Posted by Zabac
(Post 285772)
If I had any free time right now I'd find a shop that can do it and do the R&D on the fittment myself and then find someone with AL welding skills to do what I can't...fuck work man, I have no life!!!
This is not complicated, you just need some flat stock 1/4-1/2" Al and give them dimensions of what you want done, they could spit 10-20 of these in a few hours for less than $20 each. Way less I assume. |
Originally Posted by Braineack
(Post 285784)
btw, is that a clear hose for the slave line?
|
1 Attachment(s)
Originally Posted by Braineack
(Post 285781)
what are we talking about?
It places t-stat at the head, has heater feed/return and routes the coolant towards the coldside via hardline. You could add a bung for a sensor or two if you want to. You can have it made out of AL or SS, should be very cheap and do exactly what we all want it to do. It seems like such a simple solution, I wonder why no-one has it on the market. It would replace several expensive to make pieces like t-stat housings, a big thick flange with heater holes that you have to buy fittings for, etc. Attachment 212322 |
At least the Dip Stick is in one piece!
A rarity! Clean that stinkin engine bay up before you install that pretty new motor |
Originally Posted by Zabac
(Post 285814)
A poor drawing of a coolant outlet for the back of the head.
It places t-stat at the head, has heater feed/return and routes the coolant towards the coldside via hardline. You could add a bung for a sensor or two if you want to. You can have it made out of AL or SS, should be very cheap and do exactly what we all want it to do. It seems like such a simple solution, I wonder why no-one has it on the market. It would replace several expensive to make pieces like t-stat housings, a big thick flange with heater holes that you have to buy fittings for, etc. http://i134.photobucket.com/albums/q...e-roulange.jpg |
All times are GMT -4. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands