Lets get my car up and running today!!! Please Help.
Can anyone diagnose this problem. I just replaced the head and that obviously didnt fix my problems :vash:
http://img.photobucket.com/albums/v6...h_MOV09528.jpg http://img.photobucket.com/albums/v6...h_MOV09527.jpg First one is revving and the second is idling. |
are these videos or pics? Not working if either.
|
sorry about that. fixed
|
Where is the noise coming from? Engine or bell housing?
Put a bar or screwdriver to your ear and on various places to locate noise. Is it the same noise as before you changed the head? |
Sounds like a rod knocking to me.
Might be time for a new short block on that thing. |
throw that built bottom in already
|
Bruce - Yes. Same noise. Coming from the Intake side of #4.
Ran a compression test. All numbers look good. Paul. I know right?! |
ask artie about a 2001 head if he isn't gonna jump on it. disable the VVT for now and figure something out later for it.
|
Really sounds like a rod, and if the head didn't change it, you've got to pull the engine.
|
Bruce got an extra bottom end lying around?
|
|
sounds like rod knock to me.
|
I pulled plug wires out while it was running to see if noise would stop and it didnt.
Im starting to hate this car. |
Originally Posted by SOL General
(Post 198443)
I pulled plug wires out while it was running to see if noise would stop and it didnt.
Im starting to hate this car. How many miles on it? |
Your right...I hate him to haha
Under 20 thou if IIRC I replaced the motor when I got the car. |
Sounds more like the crankshaft endplay problem to me, but that's definitely down low.
Ron |
Originally Posted by SOL General
(Post 198438)
Bruce got an extra bottom end lying around?
|
all all the accessory's on tight? Alternator? Pulleys? Belts?
worth a shot if you havent double checked |
could be on of the lifters are broken.??. i know miatas have problems about their hydraulic lifters ticking but what if one of them broke or something could be something of that sort.. maybe
|
Originally Posted by miata-turbo08
(Post 198499)
could be on of the lifters are broken.??. i know miatas have problems about their hydraulic lifters ticking but what if one of them broke or something could be something of that sort.. maybe
|
thats a scary sound
|
ah ok i see now i just didn't really read it i was busy lol.. but yea i have no clue what that noise could be..??
|
that is almost certainly rod knock.
|
party clapper in your tailpipe?
|
How about if valve timing is out, and a valve is hitting piston. That is what it sound like to me.
|
Originally Posted by BINKOBA
(Post 198593)
How about if valve timing is out, and a valve is hitting piston. That is what it sound like to me.
Non-interference engine.. |
All times are GMT -4. The time now is 01:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands