my ebay turbo'd miata video
#21
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Campbell, California
Posts: 106
Total Cats: 0
yep, rx7 afm and 440s. stock fuel pump for now. i'm probably going to go with a walbro sometime very soon. so i can run higher fuel pressure, boy, my car is increasingly becoming more and more rx7.
#28
mods are on my vbgarage. its at 13psi of boost on 91 octane. i just stopped at 75ish because it was as fast as i wanted to take it. its the first video i ever made of it, just thought i'd show how the ebay kit is working. http://www.youtube.com/watch?v=gORHuvfLloM
#29
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Campbell, California
Posts: 106
Total Cats: 0
zoom2zoom: i only went into 2nd once. i babied first gear, then floored it.
fireindc: the afr's are around 11.2:1 at wot and full boost. idle moves around, but it idles fine.
my frankendiff works great, i still rip all of 2nd though. instead of peeling out in a straight line it now goes all over the place. the frankendiff has the 1.8 miata housing, miata pinion bearing, 1st gen rx7 lsd, 1st gen rx7 3.90:1 ring and pinion, and miata stub shafts with the stock miata clips. this one should hold for awhile.
fireindc: the afr's are around 11.2:1 at wot and full boost. idle moves around, but it idles fine.
my frankendiff works great, i still rip all of 2nd though. instead of peeling out in a straight line it now goes all over the place. the frankendiff has the 1.8 miata housing, miata pinion bearing, 1st gen rx7 lsd, 1st gen rx7 3.90:1 ring and pinion, and miata stub shafts with the stock miata clips. this one should hold for awhile.
#31
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Campbell, California
Posts: 106
Total Cats: 0
stock pressure plate with the six puck works well. its holding daily driving at 13psi. my stock clutch died after 5 days of boost. and it had tons of meat left on it. now that i've replaced all these drivetrain components, i wonder what will break next.
#37
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Campbell, California
Posts: 106
Total Cats: 0
my 225's are getting balder by the day i still spin into 3rd even with longer gears. it did it with the stock 4.30 and now with the 3.90 lsd. oh well, maybe i should get some corvette 295's on there