OK, I'll admit it, I did something stupid and need some help. I have two prosport gauges I am about to install. One is coolant temp, the other is vac/boost. They both use the same electrical connector on the back, same number of pins, same color wires. However the color code on the wires for the two connectors is in a different pin order. Problem is I mixed up the two harnesses, and am not sure which goes to which gauge. In other words they are not interchangeable based on wire order and I need to know which is which so I do not screw up the gauge when I power it on for the first time.

So, if you have a 52mm prosport gauge handy, either temp or vac/boost, can you tell me the color order of the wires on your connector? Does not matter which gauge, I only need to know one.

Here is the vac/boost gauge I have.
http://prosportgauges.com/Clear-lens...gauge-1-1.aspx

I tried calling prosport, no answer. I also RTFM and the wiring diagram does not show the wires in the same order as on either connector.

 

my oil temp, looking at the back, from left to right, is : green, white, black, orange, red.

 

Thanks cardriverx

This morning I received a e-mail message from Ryan at Prosport. I'll post it here in case anyone needs it later on.

"The boost harness from left to right is: Green, Black,Red, Orange, White. This is with the nubs on the plastic clip facing you and the wires hanging down."