Originally Posted by thesnowboarder
(Post 243389)
Ide be happy to test fit them on my 90 with 6k rear springs at a 12.0 hub to fender gap. On my flex's i have the shock body shortened as much as possible with the spring "preload" setting its ride height. Im about 2.0 of droop travel, right there on the boarder of being on the bumps all day, yet i only feel them on the freeway on hard bumps.
So confused talked to several Flex owners. A few said they had NO negative preload; so they obviously got the ride height they wanted by adjusting the bottom collar. Then I've heard guys at about 12.5" ride height with the bottom adjustment maxed out which would make you have to adjust the spring collars down 1" for 11.5" ride height (equals 1" of negative preload), 1.5" for 11" ride height (equals 1.5" of negative preload). You happen to know how low you can go by just adjusting the bottom collar all they way up (maxing it out for as short as it can be)? |
[QUOTE=danscreations;243546]
Then I've heard guys at about 12.5" ride height with the bottom adjustment maxed out which would make you have to adjust the spring collars down 1" for 11.5" ride height (equals 1" of negative preload), 1.5" for 11" ride height (equals 1.5" of negative preload). QUOTE] they must be doing something wrong, though the rears are more limited than the front as to how far they can be lowered. Also you can go with shorter springs to keep from having negative preload with lower heights. That way you can screw the shock further down without the lock collar and spring collars interfering. |
[QUOTE=johndoe;243554]
Originally Posted by danscreations
(Post 243546)
Then I've heard guys at about 12.5" ride height with the bottom adjustment maxed out which would make you have to adjust the spring collars down 1" for 11.5" ride height (equals 1" of negative preload), 1.5" for 11" ride height (equals 1.5" of negative preload).
QUOTE] they must be doing something wrong, though the rears are more limited than the front as to how far they can be lowered. Also you can go with shorter springs to keep from having negative preload with lower heights. That way you can screw the shock further down without the lock collar and spring collars interfering. No one got horribly specific when saying they were out of adjustment on the bottom. Figured they bottomed the shock body on the inside of the bottom mount instead of interferance of the two adjustment points (bottom and spring collars). |
|
So are you making these?
Speaking as a cheap ass (sorry but there are quite a few of us here) would this provide any more travel than the ISC topmounts? Or is it just less ghetto, holds the spring, and uses a spherical bearing instead of the NB shock bushings(I think the ISC uses those)? I still think these are amazingly cool and if I had the money right now I would love to get them. Another question... how much travel do you think these would have over NB mounts on teins? My current setup is SS with NB stockers, but it looks as if these would give even more travel, and even more on top of that with the use of the 22mm bumpstop. |
Originally Posted by danscreations
(Post 243546)
Your on the list when I flip the OK switch. I might just have you be the first so we can see how they're going to work on the flex.
So confused talked to several Flex owners. A few said they had NO negative preload; so they obviously got the ride height they wanted by adjusting the bottom collar. Then I've heard guys at about 12.5" ride height with the bottom adjustment maxed out which would make you have to adjust the spring collars down 1" for 11.5" ride height (equals 1" of negative preload), 1.5" for 11" ride height (equals 1.5" of negative preload). You happen to know how low you can go by just adjusting the bottom collar all they way up (maxing it out for as short as it can be)? |
still dont think the flex need these. there's enough adjustment range in the body adjustment to send the wheels into the fenders at the same time as you fully compress the bumpstops.
|
Originally Posted by m2cupcar
(Post 230744)
For the price, I wouldn't produce these. Besides already having similar products on the market,
Ya like the $35 ones I'm rockin now, best buy ever (ISC):cool: |
So do your ISC mounts give more travel than the stock NB mounts would?
|
the isc mounts work, there just a bit crude if youd ask me.
|
Can someone else provide me with some info on these ISC mounts?
|
Originally Posted by ashC
(Post 253231)
Can someone else provide me with some info on these ISC mounts?
|
Originally Posted by mmmjesse
(Post 311588)
Looking forward to getting a pair out of the next batch.
|
All times are GMT -4. The time now is 08:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands