Oops. Ebay jdm motor?
Rod knock on #4. Oops. Only 12K miles on turbo (37K total!) but all of those miles were very hard. And I think there may have been a timing miscommunication, so I was tracking with over advanced timing across the board. Either way, I want a nice 1.6 motor to swap in while I take my time building my motor. Even if I only get another 12K, its all good.
Are the ebay JDM 1.6 motors ok? Anyone used one? (Years ago, I helped put some in some rx7s and they were great.) How do I guarantee I don't get a short nose crank or noisy HLAs (mine were always loud, always hated it)? I want a warranty but I would really prefer not to have to use it. Thanks. |
I am also thinking the m-tuned coolant reroute might be a good idea this time around.
|
Might be easier/cheaper to just get on locally. Ebay ones are like 600$, and need another 300$ or so for shipping.
Even this might be a better option. Car-Part.com--Used Auto Parts Market |
I was going to suggest a local salvage yard as well. Also why not built the block of the one you blew while you're at it??
|
No miatas in these parts, I mean no miata parts in these junk yards, and if there was, they would be high mileage and have been under 10 feet of snow for a few seasons. I want to build my engine, but spend a little money at a time so as not to be missed, if you know what I mean, and to limit downtime to a day or two at a time.
|
Damn that sucks I didnt look at your location. Good luck finding a replacement though
|
JDM motors are supposed to be higher C/R than USDM.
|
Do you know how much higher?
|
Nope, I just know there have been Spec Miata guys who illegally run them.
|
I call BS on CR.
Anyways, my imported motor was a POS that had horrendous blow-by which comsumed about 1qt every 500 miles. It only lasted nearly 2 years to the date from install. The pistons ultimately melted.... http://www.boostedmiata.com/bad_ring..._piston001.JPG http://www.boostedmiata.com/bad_ring..._piston002.JPG |
So what your saying is that it is a crap shoot, like all my other options. At least I will have control over my own engine build up.
So far $819 shipped engine and trans. BTW, car still drives great, just starting to not sound so good. |
Yeah I was not very pleased with that motor. But the head off that motor on a random block has lasted another good 2 years without issues.
|
My salvage yards can get me...
58K $925 70K $850 34K $1800 All 1.6s. No accessorys(fine), no extra transmission. |
wtf? intense.
|
1993
Engine Mazda Miata MX5 NTS T3404 $450 Big Mike's Used Auto USA-MI(Harrison-Township) Request_Quote 1-586-468-8244 Request_Insurance_Quote 1991 Engine Mazda Miata MX5 M.T- GOOD ENG 5084 $550.04 Mitch's Auto USA-MI(Detroit) Request_Quote 1-800-283-3634 Request_Insurance_Quote 1991 Engine Mazda Miata MX5 (VIN 1 or 2), MT--185K 185,000 A 14788 $550 Abcat Auto Salvage USA-MI(Ypsilanti) Request_Quote 1-800-869-6933 Request_Insurance_Quote 1991 Engine Mazda Miata MX5 1.6L,RWD,DOHC,5SPD,R UNS GOOD 0 A 055171 $550 Eagle Auto Parts South, Inc. USA-MI(Three-Rivers) Request_Quote 1-800-900-8630 Request_Insurance_Quote 1993 Engine Mazda Miata MX5 1.6,M,RWD, 120,000 A 13798 $350 I-5 Auto & Truck Parts USA-WA(Chehalis) Request_Quote 800-551-4489 / 360-262-3550 Request_Insurance_Quote |
Have you searched car-part.com? You can get one from there for $300 while you build up your other engine. A JDM engine in nothign special, especially if you are going to take it right back out after you build the other engine. It will be a huge waste of money.
|
damn beat me to it
|
Sucks that there is no one local who can source a cheap engine and do the work.
Found a guy up here who imported salvage cars from the US, some Miatas among them. So I got a long nose 1.6 with 140k (km) for $300, new 1.8 clutch everything installed and working for $750. The engine isn't anything special but for that price who cares. |
All of those engines are two hundred miles away, which is fine but I don't seem to have any time anymore now that my wife works, not complaining, I think. I am going to try a local yard where I know someone who.. and see if they can deal.
|
call phil/levnubhin, maybe he can ship u a motor
561-699-3633 |
All times are GMT -4. The time now is 11:04 AM. |
© 2024 MH Sub I, LLC dba Internet Brands