pic reuest! turbo manifolds
i have bought a gt2876r turbo to replace my t25 that came as part of the hks kit asi have been havin a few problems with it it has a t25 flange so i could just bolt is straight to my hks cast manifold which seems to be great but i fancy a bit more bling
could you post picture up of you turbo exhaust manifolds so i could get some ideas ideally want top mount but do like underslung turbos ill even make one if i have too pic, manufacturer and approx cost would be great thanks lee |
I so highly doubt a 2876 will fit on a hks manifold....well, it will fit, but not with the hood shut.
this will be your best example...top mounted 2876 :) : http://gallery.y8s.com/miata/turbo/ http://gallery.y8s.com/d/17058-2/DSC02751.JPG |
http://m-tuned.com/products/manifolds/miata2.jpg
I'd recommend this one! You can purchase it at http://m-tuned.com/miata3.html |
2 Attachment(s)
r these turbos good the only reason i say this as it doesnt have 'garrett' on it
GT2876R TURBO CHARGER (spec copied just waiting for it to arrive) Turbo spec : compressor spec : 4" compressor inlet inducer : 52.7mm exducer : 76.0mm trim :48 ar 0.70 Turbine spec : wheel diameter :53.8mm trim : 76 ar : 0.64 25 psi max -t25 flange Attachment 212318 Attachment 212319 |
|
thats what im sayin will it still be a good turbo even though it isnt from what i can see made my garrett
|
madmalc: please use punctuation, you're making my head hurt. thanks.
|
Originally Posted by madmalc
(Post 285938)
thats what im sayin will it still be a good turbo even though it isnt from what i can see made my garrett
most likely yes, if the wheels are really the same. |
http://jugrnot.com/IMG_0120.jpg
Offset top mount. We'll see how well it works, I haven't even test fitted it yet. Good ole' weld-els. |
http://www.shoremotorsports.com/pics.../PaulMani1.JPG
That's what I'm going to be running with a GT2560 as soon as Tim's done making it. :) |
|
tim: you know you want one.
by the way, are you working on V8s now? :D |
I've always worked on V8's ;)
|
SSA BP (mounted to an FE) - don't know if it's a ripoff or not, it's been around a long time. btw- Tim, can you copy a manifold with it in hand? more or less work than doing the work from ground zero?
http://i158.photobucket.com/albums/t...0swap/7892.jpg http://i158.photobucket.com/albums/t...ap/header1.jpg |
Originally Posted by m2cupcar
(Post 286216)
btw- Tim, can you copy a manifold with it in hand? more or less work that doing the work from ground zero?
|
Originally Posted by m2cupcar
(Post 286216)
SSA BP (mounted to an FE) - don't know if it's a ripoff or not, it's been around a long time. btw- Tim, can you copy a manifold with it in hand? more or less work that doing the work from ground zero?
http://i158.photobucket.com/albums/t...0swap/7892.jpg http://i158.photobucket.com/albums/t...ap/header1.jpg |
yep y8s manifold posted above is the real ETD version.
|
so SSA can't take credit for the #4 ewg mount? ;)
|
I wonder if the SSA wg mount will actually let you mount a WG. :D
http://gallery.y8s.com/d/411-3/wg_doh05.jpg bare-ish manifold: http://gallery.y8s.com/d/387-3/manifold02.jpg |
why dont you pick a bigger wasgate?
|
y8s you just needed the six flag's style ewg extender tube (similar to your bov tube) that came on cjernigan's car ;)
|
1 Attachment(s)
I have an ETD racing one w/ the tial 44mm wastegate option...500+shipping
Attachment 212265 I'm not impressed with any of the joints on the inside- in my opinion it's very poorly done, but the outside looks great. They assured me that "this is how we make our manifolds" so we shall see. I can take some pics of the collector to show you what I mean if there is interest. |
Originally Posted by mighty mouse
(Post 287441)
...I can take some pics of the collector to show you what I mean if there is interest.
|
me too
|
I am too...
|
me toooooo.
|
Originally Posted by y8s
(Post 286291)
I wonder if the SSA wg mount will actually let you mount a WG. :D
http://gallery.y8s.com/d/411-3/wg_doh05.jpg |
prolly wouldn't fit a turbonetics gate either- they're fat up top too
|
Yeah.. Back when that manifold was made the Turbonetics Deltagate was a total piece of shit and Tial was worth its weight in gold. Tial was all they used. That manifold was designed about 7+ years ago. It is no longer made as we find the shorty manifolds are more popular for the mass population.
|
Originally Posted by Marc@M-Tuned.com
(Post 287679)
Yeah.. That manifold was designed for a Tial 35. Way before Turbosmart came to the North American shores from Aussie land.
didn't fit either! I ended up cutting off the port and welding it back on downstream a half inch. |
1 Attachment(s)
ebay seems to have a new 1.6 manifold with downpipe. Fit and durability is unknown though.
http://cgi.ebay.com/ebaymotors/MAZDA...ayphotohosting |
trying to figure out how that DP wont hit block....
|
Originally Posted by Braineack
(Post 287828)
trying to figure out how that DP wont hit block....
http://www.harborfreight.com/cpi/pho...4899/44829.gif |
Originally Posted by mighty mouse
(Post 287441)
...I can take some pics of the collector to show you what I mean if there is interest.
Originally Posted by MazDilla
(Post 287553)
Yes, do it! Do it now! I am sooo interested it's not funny.
Originally Posted by m2cupcar
(Post 287577)
me too
Originally Posted by TurboTim
(Post 287675)
I am too...
Originally Posted by Braineack
(Post 287676)
me toooooo.
|
Originally Posted by Braineack
(Post 287828)
trying to figure out how that DP wont hit block....
|
BANager needed on aisle 2.
Originally Posted by mighty mouse
(Post 287441)
I have an ETD racing one w/ the tial 44mm wastegate option...500+shipping
http://i50.photobucket.com/albums/f330/rigsx/225.jpg I'm not impressed with any of the joints on the inside- in my opinion it's very poorly done, but the outside looks great. They assured me that "this is how we make our manifolds" so we shall see. I can take some pics of the collector to show you what I mean if there is interest. |
Originally Posted by MazDilla
(Post 288799)
We demand satisfaction!
https://www.miataturbo.net/forum/sho...t=19010&page=5 *Edit* sorry about the delay, I forgot about this thread. (i know, i know, it's no excuse). If anyone needs more information, or pictures please let me know. I will never, ever be doing business with them again. Their shady practices, poor customer support, and really, just lack of caring has left such a sour taste in my mouth. It really is a shame... |
2 Attachment(s)
|
like mx03 turbo mounted on the bottom gives you less of bend in the exhasut. You running ac or power steering.
|
lol..i'm running both a/c and power steering...
|
All times are GMT -4. The time now is 03:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands