Post your Iphone Dynolicious results...
 

Dyno can vary one from another, brand to brand... I wonder if this is an good platform to have a good comparison of our miatas.

I should be hooking up mine for a test soon as Typhoon Cyclone NURI get out of Hong Kong.

http://dynolicious.com/

http://hk.youtube.com/results?search...s&search_type=

Very interesting video there:
http://hk.youtube.com/watch?v=0-DFbJQbeSY

I have an iphone 3g with the dynolicious software. My Beat down 1.6L that had cops, megasquirt, no afm, FM turbo exhaust, etc... ran I think a 17.5 launching from a stop light in light traffic. i forgot the mph. I'll rerun it one of these days and post my results. No HP because i don't know the cars weight. It will be fun to see a plot of my NA 1.6L vs. my new 1.8L turbo that im swapping in.

Quick!!!! Send and receive MMS pictures from someone!!! ! OOh wait.. Shit!

bought it :)

https://www.miataturbo.net/forum/sho...ghlight=iphone

iPhone said 17.0 @ 84mph, Slip said 16.2@84mph. Stock.

The 17.0 actually sounds more accurate than a 16.4 on a stock car.

16.28, 2.37 60 foot, I can scan the slips. 5k rpm clutch slip.

No A/C no P/S, just a rollbar, suspension and wheels/tires. First time out ever to the drags.

I highly doubt the timing was off. My times were mostly around 16.5.

you can email images to an MMS number/address. not that a dyno run is MMS....

I haven't run dynolicoius on my Miata yet, but I found it to be pretty inaccurate on my M45... It was showing 0-60 in the high 7's when Infiniti claims mid to high 5's. I will try it out in my Miata when I get a chance.

they should make this for the instinct, oh wait, we dont have an accelerometer...now maybe they could run it through the GPS....lol.

I tried one for 2 weeks. Never did once work. Even the AT&T Rep couldn't get it working.

i just texted a picture to my email and replied with a different picture and it came through fine. on AT&T. :dunno:

scan those slip cause i've only got a 17.1 as the best time my 1.6 put down stock. look around the internet most stock miatas only run around 17's maybe a 16.5 for a 01'

r/t-.309
60'=2.7
1/4=17.1
mph=81.9

Well his sig says he's got a '94 which means 1.8 not 1.6...so there one difference.

Hmm.. Odd. I'll stick to my Evdo r.A mogul anyway. :)

im going to bring this back from the dead. Ive had this on my iphone for a while now. I used it on my last NA and I got 111 hp which seemed about right on the money with a decked head, supertech valve springs, 02 bottom end, catless exhaust and coldside intake.

I just did this on my 04 MSM with:

FM Intake kit with 02 modifier
Custom 3 inch exhaust
27x8 cxracing intercooler
boost turned up to 10psi

http://i94.photobucket.com/albums/l1...4/photo-79.jpg

Made 206 hp

I still need to get Dynolicious, but using pocket dyno I got:

0-60: 7.49

1/8th: 10.41 @ 70.29mph

108whp (seems a little high)

I really want to see what it says once I'm boosted.

I had Dynolicious until i realized Revlite was free. Doesn't have all the features but you can supposedly plug your phone into an OBDII car and read out a ton of shit. Someone with a 96+ check it out!

iPhone Apps - Rev Lite | Apptism

By the way a Boeing 737 pulls about .32G's during takeoff.

a proper weight is needed to make accurate tests even 1/4 mile. I've found it to be very accurate as long as the weight is right. don't forget to add your own fat ass to that number. I haven't had a chance to run it in my miata yet, but have tested it at a drag strip along side the first generation g-tech and both were within 1/10th of a second. the g-tech pro however would never get close.

yeah i added my 109 pound fatass self in the equation lol