Pressing out Diff bushings..1000psi and no movement..
 

So the last part of the rx7 lsd adventure is here. I dropped the diff off at a local performance shop to get them pressed out of the rx7 diff and the miata ones out of the miata housing and swap them in.

So they call me yesterday and say that they've put all they want (in terms of pressure) and they haven't budged(miata ones that is). So any one have any idea how to get them out, tips, tricks?

If not I'm just going to cut the housing and get them out and destroy the rx7 ones as they aren't coming out to easily either.:vash:

-Dean

Are you talking about these?

http://img186.imageshack.us/img186/6...ffmountgg1.jpg

air chisel/hammer works.

you need vibration and slight pressure.

Yes.

Vibration..How?

lol nevermind, air chisel, gotcha.

Thanks guys.

i hope someone gets me a hydro press for xmas.

http://shop.com.edgesuite.net/ccimg....t_18864690.jpg

destroy DE STROY

they are a pain but a little fire and a little drilling go a long way.

(fire turn rubber to carbon dust)

How do I get the good ones out though??? I don't really wanna cut the housing if I don't have too..

You're trying to get them out in order to re-use them? Man, see, I'd just buy new ones. As you've found, I'd think it'd be crazy difficult getting them out w/o destroying them.

yeah, damn. corksport some new ms diff mounts or sumpin

I wear a respirator and just cut them out with a torch....But I'm lazy...

Shit I thought I could get away with reusing them as they're in good shape...80bux a piece for new ones...:(

Thanks guys looks like I'll just order something up, atleast removal will b nice and easy lol.

80 each!? i thought they were 100 for a set. anyway, i saw some used stockers on ebay for like 20 bucks. i'll do that or try to reuse the mounts out of my 1.6 diff. no way i'm paying 100$ for diff mounts.

Goodwin - $99.95 for a pair

Edit: Oops...you are in Canada. So $115.682 CAD.

Plus shipping lol, the wife works at a mazda dealership so I get a decent discount, prolly come out to 120ish canadian.

I have two 1.6 diffs so I was going to chop one up and use the bushings, but it would prolly be a pita..

I got mine out by banging with a BFH.

Fuck I wish lol:ugh2:

His hammer

http://www.khi.co.jp/kpm/products/in...es/03_main.gif