Suspension is finally done
finally after waiting for shocks for over a month now they finally came in. Heres the run down on parts.
Fat Cat Motorsports bump stops homemade shocks mounts ebay coilover sleeves Ground Control springs 375/300 KYB AGX shocks had to knock off the metal rings off of the shocks to make way for the sleeves and put some rubber shims behind the sleeves to keep them from jiggling around. put some rubber rings under and ontop of the springs and had to cut off about 3/4" off of the rear sleeves and about 2.5" off of the front sleeves to allow the bump stops to work. Also made some spring hats on the bottom of the shock mounts to help keep the spring seated cause i know they like to move too over the big bumps. finally got them done. http://i96.photobucket.com/albums/l1...lver0o/AGX.jpg http://i96.photobucket.com/albums/l1...ver0o/AGX2.jpg http://i96.photobucket.com/albums/l1...ver0o/AGX3.jpg |
nice mounts.
|
Cool. Will they adapt easily to Koni Sports when you realize the KYBs can't hold a candle to those spring rates? :)
|
agx's i have heard can handle up to 500 and the koni's 550.
just wish they were rebound adjustable too so i wont bouce around everywhere. nothing can be worse than 450/350 with stock shocks and even then i didnt have a problem with it untill i give it hell. oh and i have about $500 total tied up into my suspension, i believe sports alone cost over that. around 550. the stock ground control spring rates are 375/250 anyways, so i am no higher than that and aloot of people do the gc/agx combo with ok results. going with sports is the best but its sooo fucking much money i would just go with some tein flex's or somthing |
Most guys set them to 7 on stock shocks, or so I've heard. It can handle it, sure, but you really want more valving. 550s on Sports is pushing it. Most guys who run 550 in the front for STS2 are revalving to RACE specs.
Sports are around $450 shipped. A bit more than a hundred more than KYBs. I always tell people that if you've got the money for Konis, get Konis, and if you don't, get KYBs. I've got around $1700 tied up in my suspension, nearly a thousand dollars in just shocks, but I wouldn't have it any other way. Best $1700 I've spent on the car. |
nice looking upper mounts! Much nicer looking than the stock ones I have.
|
Originally Posted by Savington
(Post 109516)
Most guys set them to 7 on stock shocks, or so I've heard. It can handle it, sure, but you really want more valving. 550s on Sports is pushing it. Most guys who run 550 in the front for STS2 are revalving to RACE specs.
Sports are around $450 shipped. A bit more than a hundred more than KYBs. I always tell people that if you've got the money for Konis, get Konis, and if you don't, get KYBs. I've got around $1700 tied up in my suspension, nearly a thousand dollars in just shocks, but I wouldn't have it any other way. Best $1700 I've spent on the car. |
Originally Posted by akaryrye
(Post 109520)
nice looking upper mounts! Much nicer looking than the stock ones I have.
|
http://cgi.ebay.com/ebaymotors/KONI-...QQcmdZViewItem
Mabye not $450, but there's a set for $500 shipped. |
Originally Posted by Savington
(Post 109441)
Cool. Will they adapt easily to Koni Sports when you realize the KYBs can't hold a candle to those spring rates? :)
|
Originally Posted by PaKMaN
(Post 109660)
I'm going for Koni Race shocks later on down the line.. I hear they are insane
If I were autocrossing more seriously, I would stiffen the frame and add an MSM 14mm rear sway bar. My car as-is is very, very stable at high speeds, but it pushes pretty badly under 30mph. |
Originally Posted by mxv
(Post 109592)
i did it for extra travel not looks but thx, i now have my tires touching the front fender lips and i have about 2 inches of travel left. so when i raise it back up an inch i should have about 2.75" of travel. and i know my 375's witht he shocks at full soft wont use up but 1-1.25"
|
Nice, what about sways?
|
I was thinking of making some similar top mounts like that to get some more shock travel back. I realized today that the PO reused the tophats when he put in the GR2s and H&R springs because the passenger side is held on by regular bolts, I sure hope they are a high grade :vash: . By any chance could you share the dimensions?:ughug:
|
All times are GMT -4. The time now is 09:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands