Through a rod threw the block, what options?
Ok guys I had a boosted 1.8 96, is the 1.8 block the only one that will bolt back up? If so its fine just wanted to look at my options. I was thinking maybe a speed block or something to that extent.
thanks, Jason |
Just collect all the bits of the block from the side of the road and JB weld it back together.
|
Get a 2jz. I hear they'll bolt right in!
|
So, exactly what is a speed block?
|
It the fast one. I hear it's better than that Type R block. Or the M edition block.
|
I thought the speed block was the one with speed holes in it. Sounds like the op is just a few more holes away from having a DIY speedblock.
|
Originally Posted by TNTUBA
(Post 1119669)
It the fast one. I hear it's better than that Type R block. Or the M edition block.
|
Options? ......... You have a whole, in your block ...Evaluate why it happened, Replace your engine, only option. Its not a Honda, so there is no "Frankenstien Swap" or Magic Beans under the hood of another car.
|
The problem is he doesn't have a whole block.
he has a hole in the block. See the difference? One is correct grammar, the other is not. |
install the 5.7 block
I hear it works wonders |
So you took THIS: https://www.miataturbo.net/general-m...-higher-78194/
And ran ALLOFIT until it popped. I guess you don't need to worry about that squeal anymore. :bowrofl: |
The moar it squealed the harder he got.
|
Originally Posted by 18psi
(Post 1119727)
The moar it squealed the harder he got.
|
Originally Posted by curly
(Post 1119718)
The problem is he doesn't have a whole block.
he has a hole in the block. See the difference? One is correct grammar, the other is not. |
Originally Posted by 18psi
(Post 1119727)
The moar it squealed the harder he got.
But seriously, LS1. |
Where are the pix?
|
Originally Posted by MeowMeowTurbo
(Post 1119655)
Ok guys I had a boosted 1.8 96, is the 1.8 block the only one that will bolt back up? If so its fine just wanted to look at my options. I was thinking maybe a speed block or something to that extent.
Any B series engine will bolt to your transmission. That includes the ones installed in the Ford Escort, the Kia Sephia, etc. Ideally, you'll grab a BP, which is the specific 1.8 engine used in the '94-'97 Miata, so that all of your accessories and manifolds will bolt right up. I'll defer to Wikipedia for a specific listing of potential donor vehicles: https://en.wikipedia.org/wiki/Mazda_B_engine#BP Basically, anything from the list above will work, presupposing that you swap all of the accessories and manifolds over from your old engine. |
Joe,
The "speed" is not specifically mentioned there, spoon feed him some moar plz Kthxbi :giggle: |
Show of hands: How many people saw this coming?
|
1 Attachment(s)
Originally Posted by 18psi
(Post 1120011)
Joe,
The "speed" is not specifically mentioned there, spoon feed him some moar plz Here is a hedgehog, playing bagpipes, riding a chicken: https://www.miataturbo.net/attachmen...ine=1397071785 |
:wavey:
|
Originally Posted by Joe Perez
(Post 1120017)
You need to lay off the drugs, man. It's right there under BP-4W.
Here is a hedgehog, playing bagpipes, riding a chicken: STOP BEING SO DECEPTIVE JOE :noob: |
1 Attachment(s)
Originally Posted by 18psi
(Post 1120023)
it says Mazdaspeed, not Speed.
STOP BEING SO DECEPTIVE JOE :noob: |
1 Attachment(s)
Originally Posted by Joe Perez
(Post 1120007)
Now that enough time has elapsed, we can give you a straight answer.
Any B series engine will bolt to your transmission. https://www.miataturbo.net/attachmen...ine=1397074849 B18C Do the swap OP, you'll be the most respected guy here. |
gfore even sells a RWD reverse direction tranny that bolts to the b series, perfect for the swap.
|
screw the b18c
too much displacement he needs the b16 |
2 Attachment(s)
Originally Posted by Tw34k
(Post 1120034)
YEAH BOYYYY
|
|
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1397086084
photobucket says this isn't the first time you've done this to something |
Originally Posted by Chiburbian
(Post 1120053)
Jamie Hyneman Pony?
Rule 34-P indeed... |
Originally Posted by curly
(Post 1119718)
The problem is he doesn't have a whole block.
he has a hole in the block. See the difference? One is correct grammar, the other is not. |
A one-leged chicken, at that!
(Referring to Joe's hedgehog/bagpipe/chicken photo) |
All times are GMT -4. The time now is 09:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands