Take a xanax

As the new owner of said head, I can tell you that there was one lifter with about 0.020" clearance. So tick tick tick.....

Interesting. I had plans to go through that head like I am about to go through my '02 head. Gordon, which lifter was it?

Trey, did John do new valves in that motor? That '99 head had about 100k on it when the piston vomited all over it.

My BP4W head made the same noise, all shims were in spec, I wouldn't worry.

But if you want to worry, theres also the Rotrex. You don't have to go n/a! Jimmy from fujiracing is dropping the BP motor and doing a ITB 13b swap. So he's selling his ITB parts.

No new parts , it had 30k on it. I'll put feelers on it this weekend.

Its not making the noise anymore....I guess it was just a cold motor, lol.

omg you pussy ------:giggle:

Every single paranoid thread hustler makes should automatically re-direct him to some gay porn website

I didn't note the cylinder at the time. As I was tearing it down I saw some unusual daylight under one cam. I stuck something in the gap that was about 20 thou, mumbled wow and moved on.

:hustler::loser:

Now, that'd be a first.

Does it do it cold only? Then it's piston slap maybe.

aww hustler, poooor hustler he got a bit scared. Man up, play with your dick, and its fine. My doofy 4W engine has sounded like that since new, fucking loud ass valvetrain D:

Itll be fine, if you are really feeling worried about it, just go jam your dick in the oil fill hole. So warm, mmmmmm

Possibly, its very faint too, but probably eating the motor...another reason why cold weather felches my anus.

sounds a little like this:

My engine made the exact noise before it gave out! The built one! :giggle:

Hustler, seeing colder temps in Texas finally?

I thought miata valvetrains were noisey until I heard a e30's on a cold morning. I thought something was going to come thru the hood.