ENTHUZA exhaust Group Buy - ENDS 5/31
For those of us who missed the first group buy, this one works almost the same: we need 3 sales to qualify, and get 15% discount on aluminized ("budget") and 10% discount on stainless systems since the price for stainless has gone up.
Click here for prices, pre-discount. The only thing not listed is the 3" budget, which is $330. (copied from the old GB thread) The included tip will be a section of exhaust pipe welded onto the muffler. Upgrades are available. Cats or test pipes are also available for almost any downpipe or engine combination to fit the exhaust. Jason will quote those prices on an individual basis. Jason asks that if you're interested, please call him. He'd rather spend a few minutes on the phone with you, spec'ing out what's best for you, than going back and forth via email. His phone number is 404-310-3302. I'm going for the 3" budget. Post when you're ready to order! |
Just got off the phone with Jason- a real helpful guy. Sucks his 3"exhausts will not clear the 1.6 diff assembly as they are designed around the 1.8's. So i just went for a 2.5" aluminized, w/ magnaflow muffler and testpipe for $420 shipped. Still a hell of a deal.
jump in on this groupbuy kids! ;) |
Fireindc, Will it not clear the 1.6 diff because of the stub axles? I'm interested in knowing the reason and it's probably easier to post here than call Jason for a small question like that. Thanks.
|
Hmm, im actually not 100% sure why although Jason did explain it to me over the phone. What i do know for sure is that there is room for a 3" w/ a 1.6 diff installed, BUT his exhausts will not clear it because they are all designed around the 1.8 rear end. I even asked if i could fit one of his 2.75" exhaust but that was also a no. Kinda sucks since i really did want at least a 2.75" exhaust, but i guess w/ my 2.5" downpipe it wont make too much of a difference anyways.
Either way if your are interested call Jason! At least one more person should order an exhaust and get in on this group buy! He will answer any questions you have then over the phone. Hes a cool guy. |
'Course, since you ARE turbo it makes sense to upgrade to a 1.8 rear anyway..
|
Originally Posted by kotomile
(Post 258781)
'Course, since you ARE turbo it makes sense to upgrade to a 1.8 rear anyway..
|
Originally Posted by jasonrobo02
(Post 258802)
While I haven't spoken with Jason directly, I think it has more to do with the single-piece axles of the 96+ diffs vs. the 2 piece design of the 90-95. So IMO not neccessarily will switching to a 1.8 size diff do you any good. I'm going to call Jason to confirm this though.
|
mine fits with the 7" rear w/stubs....
|
Mine started to rub a couple of months ago. I re-adjusted my downpipe bolts and such and it stopped rubbing. Never heard of any other issues.
|
I am in on this. Talked to Jason today and put in my order.
|
Nice, and kotomile.. i cannot afford upgrading at this point in time, though it would be the logical solution. My money savings goes in this order, buying fuel pump, exhaust, struts, injectors/ms, then upgrading the rear.
|
so does that mean that the 3 inch won't fit my 1.6l? and i'm going to upgrade my dp
|
I'd like to participate in this.
I spoke to Jason once about a 3" for my FM II system but did not place an order. I need to followup with him again re the group buy. I'm looking to install a 3" system w/metal core cat starting from my FM 2.5" downpipe on back. I'll PM you if I can. |
All times are GMT -4. The time now is 09:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands