ENTHUZA exhaust Group Buy - ENDS 5/31

 
Old 05-16-2008, 01:45 PM
  #1  
Junior Member
Thread Starter
iTrader: (1)
 
Join Date: Oct 2007
Location: Bay Area, CA
Posts: 105
Total Cats: 0
Default ENTHUZA exhaust Group Buy - ENDS 5/31

For those of us who missed the first group buy, this one works almost the same: we need 3 sales to qualify, and get 15% discount on aluminized ("budget") and 10% discount on stainless systems since the price for stainless has gone up.

Click here for prices, pre-discount. The only thing not listed is the 3" budget, which is $330.

(copied from the old GB thread)

The included tip will be a section of exhaust pipe welded onto the muffler. Upgrades are available.

Cats or test pipes are also available for almost any downpipe or engine combination to fit the exhaust. Jason will quote those prices on an individual basis.

Jason asks that if you're interested, please call him. He'd rather spend a few minutes on the phone with you, spec'ing out what's best for you, than going back and forth via email. His phone number is 404-310-3302.

I'm going for the 3" budget. Post when you're ready to order!
Latch is offline  
Old 05-16-2008, 04:32 PM
  #2  
Elite Member
iTrader: (13)
 
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 5,758
Total Cats: 278
Default

Just got off the phone with Jason- a real helpful guy. Sucks his 3"exhausts will not clear the 1.6 diff assembly as they are designed around the 1.8's. So i just went for a 2.5" aluminized, w/ magnaflow muffler and testpipe for $420 shipped. Still a hell of a deal.

jump in on this groupbuy kids!
Fireindc is offline  
Old 05-16-2008, 08:56 PM
  #3  
Senior Member
iTrader: (13)
 
Join Date: Sep 2006
Location: San Diego
Posts: 606
Total Cats: 0
Default

Fireindc, Will it not clear the 1.6 diff because of the stub axles? I'm interested in knowing the reason and it's probably easier to post here than call Jason for a small question like that. Thanks.
jasonrobo02 is offline  
Old 05-18-2008, 09:23 PM
  #4  
Elite Member
iTrader: (13)
 
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 5,758
Total Cats: 278
Default

Hmm, im actually not 100% sure why although Jason did explain it to me over the phone. What i do know for sure is that there is room for a 3" w/ a 1.6 diff installed, BUT his exhausts will not clear it because they are all designed around the 1.8 rear end. I even asked if i could fit one of his 2.75" exhaust but that was also a no. Kinda sucks since i really did want at least a 2.75" exhaust, but i guess w/ my 2.5" downpipe it wont make too much of a difference anyways.

Either way if your are interested call Jason! At least one more person should order an exhaust and get in on this group buy! He will answer any questions you have then over the phone. Hes a cool guy.
Fireindc is offline  
Old 05-18-2008, 09:27 PM
  #5  
Elite Member
iTrader: (24)
 
kotomile's Avatar
 
Join Date: Oct 2006
Location: Monterey, CA
Posts: 7,538
Total Cats: 40
Default

'Course, since you ARE turbo it makes sense to upgrade to a 1.8 rear anyway..
kotomile is offline  
Old 05-18-2008, 10:31 PM
  #6  
Senior Member
iTrader: (13)
 
Join Date: Sep 2006
Location: San Diego
Posts: 606
Total Cats: 0
Default

Originally Posted by kotomile View Post
'Course, since you ARE turbo it makes sense to upgrade to a 1.8 rear anyway..
While I haven't spoken with Jason directly, I think it has more to do with the single-piece axles of the 96+ diffs vs. the 2 piece design of the 90-95. So IMO not neccessarily will switching to a 1.8 size diff do you any good. I'm going to call Jason to confirm this though.
jasonrobo02 is offline  
Old 05-19-2008, 12:28 PM
  #7  
Junior Member
Thread Starter
iTrader: (1)
 
Join Date: Oct 2007
Location: Bay Area, CA
Posts: 105
Total Cats: 0
Default

Originally Posted by jasonrobo02 View Post
While I haven't spoken with Jason directly, I think it has more to do with the single-piece axles of the 96+ diffs vs. the 2 piece design of the 90-95. So IMO not neccessarily will switching to a 1.8 size diff do you any good. I'm going to call Jason to confirm this though.
Whoa, please do. I'm using the '94 diff and stubs, and ordered the 3".
Latch is offline  
Old 05-19-2008, 12:38 PM
  #8  
Boost Czar
iTrader: (61)
 
Braineack's Avatar
 
Join Date: May 2005
Location: Chantilly, VA
Posts: 76,140
Total Cats: 2,275
Default

mine fits with the 7" rear w/stubs....
Braineack is offline  
Old 05-19-2008, 04:37 PM
  #9  
Supporting Vendor
iTrader: (31)
 
Savington's Avatar
 
Join Date: Nov 2006
Location: Sunnyvale, CA
Posts: 15,234
Total Cats: 1,979
Default

Mine started to rub a couple of months ago. I re-adjusted my downpipe bolts and such and it stopped rubbing. Never heard of any other issues.
__________________
Trackspeed Engineering
High-Performance Turbo Specialists - Sunnyvale, CA - 650-701-7223 - Email us!
Originally Posted by codrus View Post
Basically I've come over to the camp of "If something is a reliability problem on the track, just ask Andrew and do what he says".
Savington is offline  
Old 05-20-2008, 05:46 PM
  #10  
mkturbo.com
iTrader: (24)
 
shuiend's Avatar
 
Join Date: May 2006
Location: Charleston SC
Posts: 14,365
Total Cats: 1,323
Default

I am in on this. Talked to Jason today and put in my order.
shuiend is offline  
Old 05-20-2008, 10:43 PM
  #11  
Elite Member
iTrader: (13)
 
Join Date: Dec 2006
Location: Taos, New mexico
Posts: 5,758
Total Cats: 278
Default

Nice, and kotomile.. i cannot afford upgrading at this point in time, though it would be the logical solution. My money savings goes in this order, buying fuel pump, exhaust, struts, injectors/ms, then upgrading the rear.
Fireindc is offline  
Old 05-25-2008, 02:43 PM
  #12  
Junior Member
 
Join Date: Oct 2005
Posts: 74
Total Cats: 0
Default

so does that mean that the 3 inch won't fit my 1.6l? and i'm going to upgrade my dp
nvmx-5 is offline  
Old 05-26-2008, 10:59 AM
  #13  
lll
Newb
 
Join Date: Jul 2007
Posts: 2
Total Cats: 0
Default

I'd like to participate in this.

I spoke to Jason once about a 3" for my FM II system but did not place an order. I need to followup with him again re the group buy. I'm looking to install a 3" system w/metal core cat starting from my FM 2.5" downpipe on back.

I'll PM you if I can.
lll is offline  
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
67
03-16-2019 08:07 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
stoves
Suspension, Brakes, Drivetrain
5
04-21-2016 03:00 PM
tazswing
Race Prep
20
10-03-2015 11:04 AM


Thread Tools
Search this Thread
Quick Reply: ENTHUZA exhaust Group Buy - ENDS 5/31


Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.