Turbo Blankets!!!!
2 Attachment(s)
Ok guys, I had talked about trying to set something up so we could get some of these nice turbo blankets for around $110 shipped. I got it all set up with Alamo and called and ordered 2 already. They are available in black and silver.
You can call them at 817-860-4300 and reference the "Kelly Deal" for the turbo blankets. Here is a pic of mine. Attachment 217170 Attachment 217171 |
what sizes?
|
They fit T3 and T4 based turbine housings no problem but they will also work on a lot of the smaller stuff as well when you cinch them up. You can see in my pics it fits well on my old T3 with room to cinch it up even more.
|
Originally Posted by Wideopentuning
(Post 61927)
They fit T3 and T4 based turbine housings no problem but they will also work on a lot of the smaller stuff as well when you cinch them up. You can see in my pics it fits well on my old T3 with room to cinch it up even more.
|
Shoot them a call and see what they say. I think it will snuggle down on your T25 no problem though.
|
Would you recommend the t3 for the td04h on the greddy kit. Also, how long will this group buy be open for, I just found a smoking deal for a turbo tony dp, and will have to jump on it, so, I will have to wait until the 15th to get the blanket. Sound good:robert:
|
This is no group buy or anything. I needed a blanket and so did a buddy so I figured I would make a call to see if a bunch of people wanted them if we could get a small price break.
They only offer one blanket and it fits T3's and T4's but should work on the T25/26/and 15g |
Exactly how well does this thing work? I understand it will lower underhood temps, but by how much? Does it improve with scavenging? Are there ANY drawbacks?
|
you'll be able to rest your hand on top of the blanket.
All the heat stays in the housing, which likely results in improved turbine efficiency. Lower underhood temps are good for lower final intake temps at the manifold if the sourced air isn't as warm. No need for being super creative with metalwork and making heat shields. DIY Bling Factor ;) |
Brain pretty much summed it up. They do a great job keeping the heat in.
|
That's what I thougt... maybe after Christmas. Car money this month goes to dyno.
|
Any issues regarding trapping moisture against the turbo?
|
It's not acting like a sealed header wrap, so I would assume no worries.
|
I don't think so.
|
After taking a second look at my turbo I just don't see how I would mount this thing. The WG hookup and large dp flange would make my install comletely different than what you have pictured on your turbo. Ugh!
|
someone with a GReddy buy one and install it, so us risk adverse guys can see how it fits on a GReddy'd kit :)
|
I'll send mine to someone if they wanna test fit.
|
I don't think it would fit on the Greddy turbo because of the location of the wastegate actuator, might have to modify it some what.
|
send it to me with the vaculator. i can test it on my t3 and brads greddy and take pics. Which will in turn probably convince me to buy one.
|
Ok. It will probably be next tuesday when it ships out unless my blanky shows up sooner.
|
Wow....My blanket just showed up. I ordered it on monday:bigtu:
|
could test fit on my T3.... have a dyno day on saturday also.....probably wouldn't make it by then.... I need to buy one....
|
They fit perfect on T3's I am gonna go measure mine and post dimensions for you guys.
|
I could test fit to GT28R and provide photos.
Let me know. hrk |
I have a guy with a Talon with a 14b that I can test fit it on. If it fits that it will fit most the small stuff.
|
1 Attachment(s)
The blanket is about 2.5" wide inside but easily opens up to around 4.5" The length of the inside is 14" end to end. This this thing will fit a lot of different turbos.
http://i6.photobucket.com/albums/y22...Blanket001.jpg http://i6.photobucket.com/albums/y22...Blanket002.jpg http://i6.photobucket.com/albums/y22...Blanket003.jpg Attachment 217166 |
Nice pussy, looks like a nice tight one to me, by one I mean fit.
|
2 Attachment(s)
Measurements of a Garrett T25 off a redtop Nissan SR20.
Looks like the blanket would fit fine, might want to wire it together at the bottom. Should work great though. |
Anyone else pick one up?
|
You have very pretty hands :)
|
I will tell my fiance Malia you said so...they are hers:bigtu:
|
duh, how'd I miss this thread. friggin orlando sucked away my will to live.
|
whoredered.
|
I bought a buddy one for his GTI Vr6 with a built 3.0 bottom end and a GT35R.
http://www.mkippen.com/images/forvor...649%20copy.jpg |
just looks so damn cuddly all bundled up for winter.
|
I gave him a hard time for buying white exhaust wrap:gay:
|
Any word yet if these fit the greddy turbo?
|
I think it will be just fine. Here is the thing though....even if its a c-hair loose its still much better than any other option.
|
You mean it's better than my custom license plate heat sheild?
|
Very true, I am mainly worried about it affecting the wastegate operation.
|
Is this sale still going on? Will it fit the GT2560?
|
Just call up Alamo. Yes it will fit fine.
|
Originally Posted by Wideopentuning
(Post 61923)
Ok guys, I had talked about trying to set something up so we could get some of these nice turbo blankets for around $100 shipped. I got it all set up with Alamo and called and ordered 2 already. They are available in black and silver.
You can call them at 817-860-4300 and reference the "Kelly Deal" for the turbo blankets. |
I don't know him personally. I bought a turbo blanket for my Miata there a year and a half ago. I figured I would set something up for the guys here. From talking to him on a phone a couple times he seems like a nice guy.
|
Yeah, he is great. I get great deals from him, which includes the Greddy Turbo Kit I have on the Miata.
|
Where are the turbo blankets???
I cannot seem to find that turbo blanket on alamomotorsports.com. Can you give me the link please..
Serge Thanks |
Thats because you have to call them and order it. Its not listed on the site.
|
Anybody tried it with an internal wastegate??
Will it work? I have a GT28R (2560) with an internal wastegate. Thanks Serge |
Are there any pictures with one on a GT28 internal WG?
|
I'll try to remember this weekend... I'll take one for you, but I dont use the internal gate on mine. It's the potato turbine housing welded shut. You *might* have issues with the rod. It's pretty big on there.
|
Anyone got this on their Greddy turbo yet?
|
Originally Posted by Wideopentuning
(Post 64256)
I bought a buddy one for his GTI Vr6 with a built 3.0 bottom end and a GT35R.
http://www.mkippen.com/images/forvor...#37;20copy.jpg |
Yup.....MKIII. We have a crew of 4 of us that all have boosted Vr6 MKIII's in my area.
Also the blanket fits over a 16g turbo with ease. Just made a little slit for the actuator rod. Works perfectly. It should fit all internally wastegated turbos with the same mod. |
ordering one now. WOT promised that if it doesnt fit perfectly he himself will come put it on =) sounds like a deal to me:bigtu: (BTW greddy td04h
|
These still available? Is there online ordering or do we need to call them in?
|
Call the number listed in the first post and they will take care of you
|
For the people that have this,how well does this blanket work? and are there any fitment and function issues with turbos running a internal wastegate?
|
I imagine you'd have issues with an internal wastegate. This thing sits pretty snug over the housing.
super huge pic: http://gallery.y8s.com/d/17047-1/DSC02741.JPG You can see it pretty much fits down around the CHRA so I'm not sure where you'd run the WG actuator rod... |
Thanks for the picture y8s.Does anyone else run one of these blankets with an internal wastegate? I would really like to know if it will work before I shellout that kind of money on this item.
|
Rob at Flipside is running one on his internally gated 16g. He just made a small slit for the actuator rod and it works fine. Even better is how cool his brake fluid reservoir stays now.
|
All times are GMT -4. The time now is 06:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands