90-93 Hydra need help
My harness got cut up and I have no idea where to begin when it comes to re-doing the connections. If anyone could post photos/pinouts/diagrams for it, that would be great.
This is what I have so far. Admittedly not much. :c Ped 8 Top row 2,3,4,5,6 are all cut Bottom row 4,11,12 are all cut 7 still attached (goes to bottom row #9) Ped 9 Top row 1,2,3,4,5,6,8,10,12,14,15,16 all cut Bottom row 1,3(white wire),5&6(both red wires),8,10,12,13,14 are all cut 15 still attached (goes to bottom row #12) 16 still attached (goes to bottom row #24) Delphi Top row 3,4,7,8,9,10,11 are all cut 6 not cut (goes to top row #24) Bottom Row 4,12 are all cut RIP me. I contacted flyin miata to see if I could get a diagram from them, but who knows how long that will take. |
FM is probably your best bet. You might even want to just get a new subharness from them. unless you are really good I feel like you're going to be chasing connectivity issues forever. But FYI the Hydra takes GM Third Gen F-body ECM terminals if you do decide to rewire it yourself.
|
All times are GMT -4. The time now is 03:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands