Drezi

My harness got cut up and I have no idea where to begin when it comes to re-doing the connections. If anyone could post photos/pinouts/diagrams for it, that would be great.

This is what I have so far. Admittedly not much. :c

Ped 8
Top row
2,3,4,5,6 are all cut
Bottom row
4,11,12 are all cut
7 still attached (goes to bottom row #9)

Ped 9
Top row
1,2,3,4,5,6,8,10,12,14,15,16 all cut
Bottom row
1,3(white wire),5&6(both red wires),8,10,12,13,14 are all cut
15 still attached (goes to bottom row #12)
16 still attached (goes to bottom row #24)

Delphi
Top row
3,4,7,8,9,10,11 are all cut
6 not cut (goes to top row #24)
Bottom Row
4,12 are all cut

RIP me. I contacted flyin miata to see if I could get a diagram from them, but who knows how long that will take.

Sandro351

FM is probably your best bet. You might even want to just get a new subharness from them. unless you are really good I feel like you're going to be chasing connectivity issues forever. But FYI the Hydra takes GM Third Gen F-body ECM terminals if you do decide to rewire it yourself.