What is the statute (sp?) of limitations?
|
If you want to take advantage of your freedom before it's gone, you can contact the vendors on the site, describe what happened and the site's response and see what they'll do to support you. If it's really that bad, maybe some wouldn't want to be associated with the site. That would pressure the site owner to take some action.
|
Tim hasnt responded back to me in a few days which means hes too busy to or he just doesnt give a shit anymore. Hes the site owner and as you can see, hes never done anything in the past but let this asshole keep selling and promote him to a mod.
|
Then go to the vendors advertising on his website, and tell them you're posting on MT as well.
|
talking to Tim right now via I.M.
|
FYI I bought my Jenvey ITBs from Noah, and all the (aluminum) air horns were broken. Sure, he can blame USPS or whatever, but the ITBs were wrapped in a fucking BATH TOWEL for fuck's sake. I didn't pay much attention as I never intended to run the ITBs on the horns (I have an FRP plenum from Bill Schenker) but he didn't know that. Anyway, it was entirely his fault since he didn't package it properly.
Jim |
Yeah the head i bought was horribly packaged with a single towel wraped around the head. Asshole
|
When I shipped a head, I wrapped around in bubble wrap tightly, then put it in an oversized box full of peanuts. I take pride in packaging, it shows you care about the product you are shipping. things shipped poorly are useless worthless.
|
When I bought my SC from myblueC5, he not only used that foam in a bag stuff, he packed the whole thing between old seat cushions. The box could have fallen off a truck on the highway and the parts would have still been okay.
He also shipped the day I emailed him and told him the money orders were on the way, a full 3 days before he got the money. On top of it, when I couldn't find one of the injector connectors, he ordered one from where he originally got them, and had it shipped directly to me. Now that's integrity. |
My box showed up with the DP sticking half out of the box lol. Medic.4.life I believe it was.
|
Originally Posted by Bond
(Post 518198)
My box showed up with the DP sticking half out of the box lol. Medic.4.life I believe it was.
That guy is a complete fucking moron..have gotten into it with him a few times on CR...he is an easy target BTW. |
Originally Posted by Braineack
(Post 518139)
I take pride in packaging, it shows you care about the product you are shipping. things shipped poorly are useless worthless.
|
Originally Posted by Braineack
(Post 518139)
I take pride in packaging, it shows you care about the product you are shipping. things shipped poorly are useless worthless.
I bought something recently that was basically a metal cylinder, about 1-2 lbs. It was shipped to me in a USPS envelope (not a box, an envelope). Surprise, the envelope arrived with nothing in it. The cylinder tore right through the envelope during shipping. Amazingly USPS found the missing item when I filed a claim and sent it to me no charge. The seller was a useless POS and did nothing. |
This forum rocks, the reputation literally keeps the douche's out.
|
The Original fs add:
Originally Posted by noah
(Post 35964852)
99 head
port work supertech valve springs MMD shim under lifters 1mm oversize SS SI valves decked head felpro valve stem seals RD lash caps stock cams decked head ARP head studs asking 2500 obo all the work has been done to the head and only thing left to do is asemble and set the lash (grinding the lash caps is required to set the lash) http://img.photobucket.com/albums/v2...best/head1.jpg http://img.photobucket.com/albums/v2...t/exhseat2.jpg
Originally Posted by noah
(Post 35965098)
it was ported for NA
Originally Posted by noah
(Post 35965697)
i am having to pay for school out of my own pocket this year and i do not want to take out a student loan so the toys gotta go :(
Originally Posted by noah
(Post 35965914)
jackson cylinder head in jackson mississippi did the work for me on the head.
my plans was to have a built bottom end with 10.5:1 compression, cams, throttle bodies and SDS EFI making 150-170whp with a 1900 pound miata
Originally Posted by noah
(Post 35977345)
that is streetable if i am sure you could make more power but it would no longer be streetable
Originally Posted by noah
(Post 35978305)
more pictures of the head
http://img.photobucket.com/albums/v2...d/IMG_8640.jpg http://img.photobucket.com/albums/v2...d/IMG_8665.jpg http://img.photobucket.com/albums/v2...d/IMG_8661.jpg http://img.photobucket.com/albums/v2...d/IMG_8660.jpg http://img.photobucket.com/albums/v2...d/IMG_8647.jpg
Originally Posted by noah
(Post 35978307)
http://img.photobucket.com/albums/v2...d/IMG_8643.jpg
http://img.photobucket.com/albums/v2...d/IMG_8642.jpg
Originally Posted by noah
(Post 35994833)
more pics!
Cams http://img.photobucket.com/albums/v2...e/IMG_8702.jpg Old Retainers Valve Keepers http://img.photobucket.com/albums/v2...e/IMG_8700.jpg Supertech Titanium Retainers http://img.photobucket.com/albums/v2...e/IMG_8698.jpg ARP Head Studs http://img.photobucket.com/albums/v2...e/IMG_8729.jpg Supertech Valve Spring Seats http://img.photobucket.com/albums/v2...e/IMG_8699.jpg Supertech Valve Springs http://img.photobucket.com/albums/v2...e/IMG_8697.jpg MMD Shim Under Buckets http://img.photobucket.com/albums/v2...e/IMG_8696.jpg 1MM Oversize SI SS Valves http://img.photobucket.com/albums/v2...e/IMG_8694.jpg Felpro Valve Stem Seals http://img.photobucket.com/albums/v2...e/IMG_8692.jpg RD Lash Caps http://img.photobucket.com/albums/v2...e/IMG_8693.jpg
Originally Posted by noah
(Post 36150462)
thanks man. i am going to keep the cam shaft with the head just incase the buyer needs it and dose not want to fool with aftermarket cams
Originally Posted by noah
(Post 36212179)
price drop: 1700 plus shipping!!!!
|
I forgot to add one of the shims was missing when I got everything:
http://i94.photobucket.com/albums/l1...DSC00193-1.jpg Oh and heres the fantastic shipping job: http://i94.photobucket.com/albums/l1...Attachment.jpg |
I just got a PM from another one of Noahs recent satisfied customers. Waiting for him to post
|
All times are GMT -4. The time now is 02:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands