got some work done on the LS1 today
finally a cool day, got a new LS7 clutch, slave cyl., flywheel, and rear main installed today, tomorrow maybe I'll do the camshaft.
|
Oh yah, and a pilot bushing.
|
Originally Posted by kotomile
(Post 145956)
What cam are you going to use?
|
nah.
|
Originally Posted by y8s
(Post 146006)
4xyourdipslacement.gif
|
Originally Posted by Joe Perez
(Post 146020)
30gallonfueltank.png
It should pull 26-28MPG on the freeway with NO problem in 6th |
Originally Posted by Philip
(Post 146022)
I'd venture to guess that the LS1 FD will get similar, if not better mileage than most of the boosted cars here.
It should pull 26-28MPG on the freeway with NO problem in 6th |
Originally Posted by kotomile
(Post 146037)
turbochargingitwouldbefuckingepic.pdf
|
Originally Posted by Philip
(Post 146042)
probably won't, no room. Nitrous, definitely though.
Philip may I suggest a direct port two stage fogger set-up for the LS1? |
Originally Posted by spike
(Post 146046)
Did someone say nitrous?!?!:nxsmile:
Philip may I suggest a direct port two stage fogger set-up for the LS1? |
working on the cam now. Having a hell of a time keeping the engine from jumping around while I jump on the breaker bar attached to the crank bolt.
|
Originally Posted by magnamx-5
(Post 146123)
Comeone phillip dont be a pussy just hold the motor i one hand and turque on the wrench with the other if the crank is rotating stick your finger on the journals to hold it still. :gay: j/k
I'm standing on the end of an 18" breaker and jumping up and down, the bolt hasn't budged. |
Originally Posted by Philip
(Post 146124)
I stuck a metal punch through a hole in the flywheel with the starter removed.
I'm standing on the end of an 18" breaker and jumping up and down, the bolt hasn't budged. |
Originally Posted by wildfire0310
(Post 146133)
hey PB blaster is your friend man
|
Originally Posted by neogenesis2004
(Post 146187)
get a big 1" drive air wrench. Should make it come off like butter.
|
Originally Posted by mazda/nissan
(Post 146185)
gain some weight then try it, should work
|
Originally Posted by Philip
(Post 146195)
Yes, because 270lbs isn't enough.
|
cam's in, just need to button up the timing cover and water pump, need new gaskets and a longer crank bolt to pull the pulley on.
|
Originally Posted by Philip
(Post 146333)
cam's in, just need to button up the timing cover and water pump, need new gaskets and a longer crank bolt to pull the pulley on.
|
Originally Posted by magnamx-5
(Post 146347)
becouse he could make up his mind and he doesn't live 30-40 miles away from his shit 90% of the time yess.
|
All times are GMT -4. The time now is 03:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands