Originally Posted by Joe Perez
(Post 1133546)
Someone here needs to build an aluminum forge.
|
Originally Posted by rleete
(Post 1133563)
I assume you mean a foundry, for casting.
|
2 Attachment(s)
Originally Posted by Joe Perez
(Post 1133546)
Hmm. None of it really looks suitable.
Doing some light googling, it seems that thematerial which OEMs are using for their intake manifolds is a material made by DuPont called "Nylon 66," which has a melting point of 260°C (500°F) and is typically reinforced with 10-20% chopped glass fiber. https://home.comcast.net/~roadska/nylon66.pdf Remington Nylon 66 - Wikipedia, the free encyclopedia https://www.miataturbo.net/attachmen...ine=1400776687 Remington started building these in 1959, sounds like they were a bit ahead of the curve on that one. |
How about a tombstone with two gauge pods above the center vents and angled towards the driver? Or a replacement stock gauge hood with integral gauge pods at the ten and two positions?
|
Originally Posted by sixshooter
(Post 1133591)
Or a replacement stock gauge hood with integral gauge pods at the ten and two positions?
Speaking of which, am I imagining that someone, somewhere, had a really nice writeup on how to integrate some specific aftermarket OPG into the stock NB gauge cluster in such a way that it didn't look like crap? |
Wasn't that on revlimiter's site?
|
1 Attachment(s)
They make something like that for Hondas
https://www.miataturbo.net/attachmen...ine=1400782351 Look at the badass with the narrowband afr gauge and the apexi SAFC. Pro tuner for sure. |
Originally Posted by Full_Tilt_Boogie
(Post 1133612)
They make something like that for Hondas
Originally Posted by Full_Tilt_Boogie
(Post 1133612)
Look at the badass with the narrowband afr gauge and the apexi SAFC. Pro tuner for sure.
|
Originally Posted by rleete
(Post 1133611)
Wasn't that on revlimiter's site?
|
Stock NB fake OPG can be rewound and when matched with the appropriate sender thus giving legitimate readings. There are about a dozen guides out there on how to do it. New face with proper graduations and its really not that big a deal.
However, I would be the first in line to buy a NB hood that integrated a pair of aftermarket gauges in the corners. I've looked into DIYing this but I don't have the time or the skills to get something I would deem "acceptable" in the end. |
Originally Posted by EO2K
(Post 1133635)
Stock NB fake OPG can be rewound and when matched with the appropriate sender thus giving legitimate readings. There are about a dozen guides out there on how to do it. .
AbeFM came pretty close with this one: https://www.miataturbo.net/attachmen...ine=1373695150 |
If I ever get around to it, I have a VEI Oil Pressure & Oil Temp gauge I'm going to take apart and hack into a OEM cluster. As of today I have 4 NB clusters in the garage and one in the car. I have problems.
|
I'm not sure if my printer is big enough to make a whole bezel piece. We'd probably have to get clever with making it in parts.
|
Originally Posted by Joe Perez
(Post 1133642)
Yeah, I've seen those instructions. Seems time-consuming and imprecise.
AbeFM came pretty close with this one: https://www.miataturbo.net/attachmen...ine=1373695150 https://www.miataturbo.net/attachmen...ine=1346100546 |
Originally Posted by Full_Tilt_Boogie
(Post 1133612)
They make something like that for Hondas
https://www.miataturbo.net/attachmen...ine=1400782351 Look at the badass with the narrowband afr gauge and the apexi SAFC. Pro tuner for sure. |
2 Attachment(s)
Originally Posted by fooger03
(Post 1133689)
LOL
https://www.miataturbo.net/attachmen...ine=1400798610 Also, digital gauges will always remind me of an 80s vintage Chrysler. https://www.miataturbo.net/attachmen...ine=1400798610 (Nope optional cassette player with Dolby NR.) |
hurry up and get an NB joe so I can steal all your cool ideas for mods
|
Originally Posted by 18psi
(Post 1133757)
hurry up and get an NB joe so I can steal all your cool ideas for mods
|
Can you print Eclipse style vents for NA? I'd pay you for a set!
|
Originally Posted by UrbanSoot
(Post 1133814)
Can you print Eclipse style vents for NA? I'd pay you for a set!
|
All times are GMT -4. The time now is 09:57 PM. |
© 2024 MH Sub I, LLC dba Internet Brands