Fun Pics. GT3071R .63A/R vs GT2860RS .64A/R & misc
Pics below, if nothing shows hit refresh or F5.
GT3071R 2.75" inlet compressor .63A/R vband turbine vs GT2860RS .64A/R vband turbine. The uninstalled turbine is the .86A/R for the 2860rs. http://www.absurdflow.com/misc/turbos/28603071_1.jpg http://www.absurdflow.com/misc/turbos/28603071_2.jpg http://www.absurdflow.com/misc/turbos/28603071_3.jpg http://www.absurdflow.com/misc/turbos/28603071_4.jpg GT3071R vs GT1544. hehe http://www.absurdflow.com/misc/turbos/30711544.jpg Fun stuff: http://www.absurdflow.com/misc/turbos/turbos.jpg Boo factory! http://www.absurdflow.com/misc/turbos/boo.jpg Horray Absurdflow! http://www.absurdflow.com/misc/turbos/horray.jpg |
I need a towel:drool:
|
ha. haha. mod powers FTL. haha.
|
One day I'll sport a absurdflow mani.....that or an artech :giggle: Your shit is nice though!
|
Can't go wrong with Abe/artech, especially if you've got a 1.6.
|
F5 worked ahaha. Man I wish I had a time machine! Da shit look beautiful.
|
Please tell me that the size of the tial housing inlet and outlets are different for different turbos
PS. I like what i see on the "boo pic" call me when your ready Tim. |
The GT30 turbine inlet/outlet size & location match the GT28 turbine. Sooo theoretically this would drop right into your setup. ;)
Could you do me a huge favor Nick? Take some pics of your setup around the compressor. I need to see how close it is to the block and engine bay. Thanks xoxo. EDIT: I have this one from Artie's car and there seems to be a lot of room for the larger GT30 compressor. but the vbands tend to end up in different spots and I try to clock them away from the block, towards the engine shelf. http://www.inoneear.com/outtheother/...tieturbo13.jpg I know your .86 turbine hits that motor mount bolt, but artie's 2560 has lots of room there. But this orientation won't work with the GT30, compressor would hit the block. http://www.inoneear.com/outtheother/...rtieturbo8.jpg |
If you put it on an angle like Ed's manifold, looks like it'd be okay.
|
Originally Posted by TurboTim
(Post 538710)
ha. haha. mod powers FTL. haha.
also: turbo not hit block. btw, if I ever need another turbo manifold... I'm coming to Tim. Also, my 2876 probably would hit block. |
MINI-MOI wants CHOCOLATE!
Tim, I can't wait to strap that mofo on my new engine :drool: |
Originally Posted by TurboTim
(Post 538838)
The GT30 turbine inlet/outlet size & location match the GT28 turbine. Sooo theoretically this would drop right into your setup. ;)
Could you do me a huge favor Nick? Take some pics of your setup around the compressor. I need to see how close it is to the block and engine bay. Thanks xoxo. EDIT: I have this one from Artie's car and there seems to be a lot of room for the larger GT30 compressor. but the vbands tend to end up in different spots and I try to clock them away from the block, towards the engine shelf. http://www.inoneear.com/outtheother/...tieturbo13.jpg I know your .86 turbine hits that motor mount bolt, but artie's 2560 has lots of room there. But this orientation won't work with the GT30, compressor would hit the block. http://www.inoneear.com/outtheother/...rtieturbo8.jpg Its fun that you make manifolds for people on my coast and I make them for people on your coast. |
Originally Posted by y8s
(Post 538976)
once it was fixed, i fixed everything.
also: turbo not hit block. btw, if I ever need another turbo manifold... I'm coming to Tim. Also, my 2876 probably would hit block. |
zomg :drool: do you collect turbos err what? wanna share?
|
Tim, can you please post a pic of the downpipe connected to the mani? I want to see how much room there is.
Thanks, BTW; beautiful work. I just don't like the color of the steel once it's been used. |
Originally Posted by TimR
(Post 539032)
zomg :drool: do you collect turbos err what? wanna share?
Originally Posted by Rafa
(Post 539035)
Tim, can you please post a pic of the downpipe connected to the mani? I want to see how much room there is.
Thanks, BTW; beautiful work. I just don't like the color of the steel once it's been used. All I have for pics are the ones located here: Absurdflow SS Vband Blended EWG Like this one: http://www.absurdflow.com/miata/stdv...bsurdflow4.jpg Actually this one is ok. http://www.absurdflow.com/miata/stdv...bsurdflow3.jpg I don't have much on the car because they don't come out well. I do this all in my garage on my back so there's not much room to place the camera to get a good shot, from underneath anyway. |
That was perfect Tim. Precisely what I wanted to see.
Many thanks |
Originally Posted by minime
(Post 538996)
MINI-MOI wants CHOCOLATE!
Tim, I can't wait to strap that mofo on my new engine :drool: |
Originally Posted by minime
(Post 538996)
MINI-MOI wants CHOCOLATE!
Tim, I can't wait to strap that mofo on my new engine :drool: |
I want Absurdflow sponsorship, haha
|
Originally Posted by Full_Tilt_Boogie
(Post 539973)
I want Absurdflow sponsorship, haha
|
Originally Posted by wayne_curr
(Post 539024)
Damn I hope Lev's turbo not hit block with his big 2871. Although I did push his out closer to the frame rail to make sure there was room.
Its fun that you make manifolds for people on my coast and I make them for people on your coast. |
Originally Posted by Full_Tilt_Boogie
(Post 539973)
I want Absurdflow sponsorship, haha
Originally Posted by kewilso3
(Post 539978)
umm, yeah, you need some middle east advertising, send me a mani and i'll cover my entire car with absurdflow stickers lol
|
Those tial vband hitsides, are soooooooo baller. Its so worth the extra money if you can afford it. My next Turbo set up will involve one....
|
More pics I took tonight. FINALLY received the correct turbo, the "compact" GT3071R. It's in the middle, GT2860RS on the left, standard compressor GT3071R on the right.
4 pics below. Hit refresh if they don't show. http://www.absurdflow.com/misc/turbos/28603071_5.jpg http://www.absurdflow.com/misc/turbos/28603071_6.jpg http://www.absurdflow.com/misc/turbos/28603071_7.jpg http://www.absurdflow.com/misc/turbos/28603071_8.jpg |
man..I want it!!! Tim, are you still taking orders? I am going hit you up once my motor is done from Cardelli.
|
Originally Posted by TurboTim
(Post 538663)
Horray Absurdflow!
http://www.absurdflow.com/misc/turbos/horray.jpg Good stuff! I love snail pronz. |
Wow, that little 71 compressor housing is pretty stealthy!
|
That's some sexy fab work, Tim.
I need a tig soooo bad. |
Originally Posted by aznDragonX
(Post 559660)
man..I want it!!! Tim, are you still taking orders? I am going hit you up once my motor is done from Cardelli.
Originally Posted by NA6C-Guy
(Post 559663)
I think you're doing it wrong. :giggle:
Good stuff! I love snail pronz.
Originally Posted by Bryce
(Post 559664)
Wow, that little 71 compressor housing is pretty stealthy!
Originally Posted by lordrigamus
(Post 559672)
That's some sexy fab work, Tim.
I need a tig soooo bad. |
I wonder what kind of spool the "small" 3071 will produce... Lets hope i don't regret my turbo decision... sigh
|
You can upgrade and sell someone your 2860. or run the 2860 on shorter tracks. Be baller.
|
Originally Posted by thesnowboarder
(Post 560030)
I wonder what kind of spool the "small" 3071 will produce... Lets hope i don't regret my turbo decision... sigh
|
I wouldn't mind knowing if it would fit either ;)
|
Tim, YGM! BTW, do you get your turbo, Tial stuff from ATP? Just found out they are about 5 mins away from my friend's speedshop in Hayward.
|
Originally Posted by Full_Tilt_Boogie
(Post 539973)
I want Absurdflow sponsorship, haha
To anyone considering buying some of Tim's stuff, you're making the right decision. After safety-wiring my CHRA I've done countless events and not worked on the turbo crap once...never put a wrench on it. I wish I could have used Tim sooner. |
we need a Absurdflow Demographics chart!!
|
Originally Posted by hustler
(Post 560154)
membership has its privileges, bro...(snipped)
To anyone considering buying some of Tim's stuff, you're making the right decision. |
Originally Posted by minime
(Post 560160)
I agree. I am gonna rock Absurdflow decals on my racecar even without any discount/sponsorship - his work is amazing.
|
All times are GMT -4. The time now is 05:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands