Originally Posted by y8s
(Post 696198)
moar: Tim, would it be too bling to replace the diamond shaped gussets with cut out letters that spell out "f l o w"?
|
haha. I will do that for your manifold Matt. On my to-do list is get a quote for a tag to weld onto the pipes like every other major manufacturer but I spend my lunches either drilling inconel or burning calories in the gym. I could use the 'drop out' letters from the tag! haha. Then again why add cost. I do have that laser engraver at my disposal. Able to engrave around pipe too...but so what.
Super baller would be one single continuous mandrel bent pipe. |
Tim, Ive been looking at your setups for awhile now and was wondering. What turbos can the tial housing connect up to? I know it will be awhile before i can even really think about having one of your setups, but I still want to entertain my mind with ideas of what I would run.
|
Smallest cold side is the GT2860RS. Largest is...well huge I'm sure. Tial does not have a turbine housing for GT25XX turbos and smaller. However ATP will machine a vband inlet into a garrett castiron GT25XX turbine but you'll still stuck with the bolted downpipe flange.
|
1 Attachment(s)
Originally Posted by TurboTim
(Post 696215)
haha. I will do that for your manifold Matt. On my to-do list is get a quote for a tag to weld onto the pipes like every other major manufacturer but I spend my lunches either drilling inconel or burning calories in the gym. I could use the 'drop out' letters from the tag! haha. Then again why add cost. I do have that laser engraver at my disposal. Able to engrave around pipe too...but so what.
Super baller would be one single continuous mandrel bent pipe. https://www.miataturbo.net/attachmen...1&d=1299094051 |
I've seen bolt on downpipe flange to vband adapters. I think I saw it on godspeed or cxracings site. |
Originally Posted by hustler
(Post 696135)
I wonder if a flex section in my DP dump would make the WG stop whistling? right now it goes "woo woo", like an alarm clock.
Woo woo? |
Originally Posted by y8s
(Post 696198)
Moar: Tim, would it be TOO bling to replace the diamond shaped gussets with cut out letters that spell out "F L O W"?
|
I wonder who these happy new owners are? I am very glad to see more 300+ miatas are being built! Fwiw if they are reading we should eventually compare spool data- I am running a log with 3071 and .86 AR. I'd expect you to hit 15psi at 3300RPM since I do at 38/39. Sounds like low rpm but maybe its possible with da flow.. |
Compare spool data would be cool. Now, I just have to get my engine back from my engine builder. I wonder the same for the 2nd AF setup since black one belongs to me.
|
frank lloyd wright with a welder....love it. The engineering in this thing is clear--between the EWG reinforcements and the flex coupling that thing is going to stay solid for a long long time.
I'm afraid to ask how many hours are in each one. |
Originally Posted by Faeflora
(Post 696261)
I've seen bolt on downpipe flange to vband adapters. I think I saw it on godspeed or cxracings site. http://www.atpturbo.com/mm5/merchant...gory_Code=GTBB http://www.atpturbo.com/mm5/graphics...fls023-001.jpg $95?! That doesn't even include the hardware or vband clamp and the other side of the flange. I'm sure the ebay ones are far cheaper and probably would last fine. But unknown vband flange size on ebay versions?? :dunno: |
Originally Posted by mann
(Post 696325)
frank lloyd wright with a welder....love it. The engineering in this thing is clear--between the EWG reinforcements and the flex coupling that thing is going to stay solid for a long long time.
I'm afraid to ask how many hours are in each one. I'll guess about 20 hours. |
Originally Posted by TurboTim
(Post 696145)
somewhere around $2800-2900 shipped depending on the turbo.
|
I need a towel
|
Originally Posted by dgmorr
(Post 696454)
That includes turbo and WG? omgz
|
1 Attachment(s)
Tim, that is just fan-fucking-tastic.
However, I can't help myself here, it's just the first thing that popped into my head: Attachment 241321 |
bhawahahahahaha that's f'in awesome!
|
Every time I see pics of your work I'm more impressed than the last. Beautiful! And these pics are great, especially the flange-to-flange shots...looks like an HR Giger drawing has come to life.
|
Damn, I drool over the standard low-mount setup as is.
The v-band setups are but a dream. A dream that I'll end up with after 2 track days on a standard bolted manifold lol. |
All times are GMT -4. The time now is 06:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands