NB from Florida and CR.net
2 Attachment(s)
Hi gang. I recently made the decision to boost my car and i figured this would be a great place to gain some knowledge. I drive a 99 which is my fourth miata and first one to be boosted.
I started ordering parts last night and so far I have... A td05 16g Turbo Tubular crap manifold Mishimoto intercooler "DIY " piping 7mge 305cc injectors 4 bolt down pipe I know this is nowhere near complete. I'm waiting for Braineack to get back to me about a megasquirt and I'm also looking around for oil/coolant lines, wideband, spark plugs, and some other misc things. My goal is somewhere between 8 and 10psi. Hopefully I can figure out everything I need to know from you wise guys. Now for pics. https://www.miataturbo.net/attachmen...ine=1321622806 https://www.miataturbo.net/attachmen...ine=1321622806 |
Welcome to the site dliverance
|
Welcome to the site, I'd contact ARTech for water/oil lines, Innovative LC1 or AEM UEGO for wideband, NGK BKR7E is the spark-plug most of us run. Good luck!
|
Yeah I have heard quite a few good reviews on the lc1. If I have anything left over after the MS, I will definitelty be picking one of those up. As for the lines, I am going there right now.
|
Welcome to the site dliverance, thanks for joining up!
|
Welcome to the Turbo Miata world.
|
Welcome to the site, sounds like you're putting together a nice setup.
Originally Posted by chokeasphyxia
(Post 796644)
NGK BKR7E is the spark-plug most of us run. Good luck!
|
Thanks for all of the advice guys.
Madvillain, I just got back from Spain last night. Can we arrange a good time to pick up that cluster? |
I'm having a bit of a pickle here. I can't seem to find where the measurement for the 99 oil feed line is. I'm pretty sure I saw it in the sticky but now I cant seem to find it. I really wish i had a 94 block right about now. I would hate to order a line and have it be too short. Maybe I should just wait til the turbo comes and measure it with a piece of string...Unless one of you guys knows off hand how long that line needs to be :)
|
36" should do... I bought mine from stealth performance fits like a charm. I did not see you listed any injectors. Rx7 460s should be more than enough for your goal.
http://www.---------------------------/oil-feed.shtml |
Originally Posted by pdexta
(Post 796967)
Welcome to the site, sounds like you're putting together a nice setup.
Tubular crap manifold |
1 Attachment(s)
Thanks Buffon01. I do have injecors. 7mge 305cc. They're going to be maxed out but they should work for 180whp.
As for the tubular manifold, I didn't have many options. I'm using a td05 turbo and I needed a cheap manifold that I didn't mind cutting and welding. Heres why, notice the flange on the turbo. https://www.miataturbo.net/attachmen...ine=1321826209 |
You should upgrade your injectors to something a little bigger. Head room is always good. Also running a high duty cycle can be a liability. Do you have pics of your manifold?
|
The manifold has not yet arrived but it's an s4 knock off (sorry begi)
The injectors should be at 328cc to retain the 80% duty cycle. That's assuming the setup will make 200bhp. |
Alright, it will be nice to have another boosted go-kart in South Florida.
|
I want to share in the Florida love! Too bad I wont be boosted for a while. Something also tells me you guys dont hang out at weenie places like autox's. Sigh, maybe some day when Im alls growned up I will feel the need to hit the track. Good luck with the build. I wish I couldve afforded one and still had a budget for suspension bits.
|
yo trey, can you pick up the gauge cluster tomorrow or wednesday?
|
I can do Wed. but I'm not sure when I get out of work. I think I still have your number but if I don't I'll PM you here Wed Morning and let you know.
|
Ebay Begi mani copies often last one week or less. You should shop for a good used mani or you will be redoing your downpipe again.
Don't use positive pressure without a wideband. Welcome. |
Thanks Sixshooter. I intend to chop and weld a lot of the ebay manifold. Which is why I went with a cheap one. I have to weld a td05 flange to it and strengthen it up quite a bit. If I knew for sure that it would work in the first shot I would have purchased the Begi manifold but since the manifold/turbo/downpipe combo are all experimental, I would rather test it out on something cheap.
Edit: And I do have a wideband. |
All times are GMT -4. The time now is 07:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands