Miata Turbo Forum - Boost cars, acquire cats. - **Aflac's MS thread plead for help**

Quote:

Originally Posted by cjernigan (Post 215871)

I don't really understand why you guys are even bothering with the boost KPA tables. We're not even using closed loop boost control so that table is irrelevant.
You should be messing with the duty cycle tables.
Even if you were trying to tune your KPa table, why would you set it all to 70 instead of the actual boost levels you wanted to see that that rpm/tps?

Here's what I have on my instructions....which is why I started messing with that table...Dunno who's wrong/right, just wanna know what I shoul dbe doing if I am wrong...

"Tuning the EBC:

Go to advanced > Boost kPa targets

This is how we tune boost. 100 = full boost (unlimited) 0 = no boost (wastegate)

Start with something low and work up from here."

---It wont let me copy the pic of the table, but the 1st 2 bins (1000/2000rpm) are 100 all the way up, and the rest are at 30...