1.6L -> 1.8L turbo TUNING question!
#1
1.6L -> 1.8L turbo TUNING question!
I currently own a 92 na6 1.6 L Miata I recently purchased everything I need to 1.8 (97 na8) swap it and when I do this, I also plan on throwing on an FM turbo kit that I have purchased. I plan on using ms2 or ms3.
I think I have everything sorted, however I知 unsure about which base map I should run, should I run the base map for the 92 1.6L because that痴 what matches the harness I知 using or do I run the base map for the 97 1.8L because that痴 the motor that I知 using. I知 new to this, so any help is super appreciate
I think I have everything sorted, however I知 unsure about which base map I should run, should I run the base map for the 92 1.6L because that痴 what matches the harness I知 using or do I run the base map for the 97 1.8L because that痴 the motor that I知 using. I知 new to this, so any help is super appreciate
#4
It gets rid of the extra plumbing and makes the cold side IC piping easier.
Stolen from carpassionchannel. Thats how I did it years ago, works great.
I built a VERY simple bracket for the throttle cable, like some 90ー bend sheet metal with a few holes and some spacers to get the cable positioned right, thats it. 30min of work
Stolen from carpassionchannel. Thats how I did it years ago, works great.
I built a VERY simple bracket for the throttle cable, like some 90ー bend sheet metal with a few holes and some spacers to get the cable positioned right, thats it. 30min of work
Thread
Thread Starter
Forum
Replies
Last Post
spestis
MEGAsquirt
4
12-28-2012 03:45 PM