Notices
MEGAsquirt A place to collectively sort out this megasquirt gizmo

1990 1.6L G28 Turbo Tune Help

Thread Tools
 
Search this Thread
 
Old Oct 4, 2016 | 01:16 AM
  #21  
matrussell122's Avatar
Thread Starter
Elite Member
iTrader: (1)
 
Joined: Sep 2016
Posts: 1,861
Total Cats: 517
From: Seattle
Default

Currently this is where im sitting. did some more logs tonight. Im almost possitive its a spark issue. going to check all my grounds tomorrow and also change the plugs to a BKR7E and gap to .030 to see if that helps. I have boost control turned off in the tune to eliminate that from the issue. Doing some shorter pulls around my house i was able to build 6psi boost before any cutout. when it cuts out the rpm has a slight drop for just a second like the ecu is losing power.
Old Oct 4, 2016 | 01:17 AM
  #22  
matrussell122's Avatar
Thread Starter
Elite Member
iTrader: (1)
 
Joined: Sep 2016
Posts: 1,861
Total Cats: 517
From: Seattle
Default

forgot to add these
Attached Files
File Type: msq
CurrentTune.msq (243.4 KB, 178 views)
File Type: csv
2016-10-03_21.44.26.csv (2.04 MB, 129 views)
File Type: msl
2016-10-03_21.35.18.msl (3.29 MB, 123 views)
Old Oct 6, 2016 | 02:04 AM
  #23  
matrussell122's Avatar
Thread Starter
Elite Member
iTrader: (1)
 
Joined: Sep 2016
Posts: 1,861
Total Cats: 517
From: Seattle
Default

Checked all groundsn and all are good n tight. and replaced plugs and gapped to .035. engine still sputters like a fuel or ignition cut. kinda lost on this. What could make it sputter like an ignition cut?
Old Oct 6, 2016 | 02:54 AM
  #24  
pakmx5's Avatar
Junior Member
iTrader: (2)
 
Joined: Sep 2015
Posts: 102
Total Cats: 3
From: Bay Area, CA
Default

Your boost control cutoff is 150kpa so I'm guessing anytime you hit 6psi/150kpa there is a fuel cut. Adjust this number to slightly higher than your planned boost

edit: confirmed by looking at logs. PW drops off as soon as you hit 150kpa.
Old Oct 6, 2016 | 09:02 AM
  #25  
matrussell122's Avatar
Thread Starter
Elite Member
iTrader: (1)
 
Joined: Sep 2016
Posts: 1,861
Total Cats: 517
From: Seattle
Default

Originally Posted by pakmx5
Your boost control cutoff is 150kpa so I'm guessing anytime you hit 6psi/150kpa there is a fuel cut. Adjust this number to slightly higher than your planned boost edit: confirmed by looking at logs. PW drops off as soon as you hit 150kpa.
I was thinking something similar but my boost control is turned off would it be in a different table?
Old Oct 6, 2016 | 12:17 PM
  #26  
matrussell122's Avatar
Thread Starter
Elite Member
iTrader: (1)
 
Joined: Sep 2016
Posts: 1,861
Total Cats: 517
From: Seattle
Default

Originally Posted by matrussell122
I was thinking something similar but my boost control is turned off would it be in a different table?
I'm dumb I'll do that tonight and get some new logs up here. Will get my boost solenoid in this weekend hopefully
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cruisin
MEGAsquirt
17
Sep 14, 2016 01:27 PM
f1luva92
Miata parts for sale/trade
4
Sep 12, 2016 01:07 PM
503TurboPeru
MEGAsquirt
9
Sep 2, 2016 04:56 PM
manageddc
DIY Turbo Discussion
1
Aug 30, 2016 12:41 PM




All times are GMT -4. The time now is 01:47 PM.